巻号一覧
全55件
国立国会図書館
目次Glass welding with ultrashort laser pulses producing mm-long filaments Fundamentals of a new sub-diffraction direct laser writing method by a combination of stimulated emission depletion and excited state absorption Selective laser thermoregulation system for accelerated degradation test of SiC/SiC CMCs Homogeneous intensity within the Rayleigh length and enhanced depth of focus for Gaussian beams UV direct laser interference patterning of diffraction gratings in poly-hydroxyethyl-methacrylate ophthalmic polymers Drilling of CFRP with reduced and non-directional heat-affected zone by using 3-kW CW single-mode fiber laser Deep drilling of structural timber with high power ultrashort pulsed laser radiation High speed soldering using laser printing for the assembly of electronic components Dual process strategy to increase the usable power for laser-milling Effective time of nanogratings formation on sol-gel films by two-beam laser interference High throughput laser drilling with high power lasers using a two-dimensional polygon mirror scanner Beam shaping and power handling of an spatial light modulator system for laser induced periodic surface structuring texturation Improved efficiency of an adaptive beam-shaping technique based on phase gratings and spatial frequency filtering Femtosecond laser ablation in burst mode as a function of pulse fluence and intra-burst repetition rate Comparative study of ultraviolet and infrared femtosecond laser irradiation on textile polymers PET and PA66 Gradient and core-cladding waveguides fabrication in porous glass Dimensionless enthalpy as characteristic factor for process control in laser powder bed fusion
国立国会図書館
目次Advances of laser welding technology of glass : science and technology Selective area Nd:YAG laser functionalization of digital photocorrosion GaAs/AlGaAs biosensor Design an asymmetrical three-beam laser interference lithography for fabricating micro- and nano-structures Laser direct writing of conductive carbon microelectrodes and micro-supercapacitor applications Comparison of structural colors achieved by laser-induced periodic surface structures and direct laser interference patterning Fabrication of breathable film using diffractive multi-beam nanosecond laser patterning of polypropylene film Formation of fine periodic structures on back surface of Si substrate by a femtosecond laser at 1552 nm Generation of rotationally symmetric micro tools using ultrashort laser pulses Processing of functional texturing on micro-fibers by laser-induced micro/nanoscale surface topographies Pulse-by-pulse optical observation of growth of laser-induced periodic surface structure at oblique incidence Laser structuring of open cell metal foams for micro scale surface enlargement In-situ pulsed laser interference nanostructuring of semiconductor surfaces Printing method for long flight distance by laser-induced forward transfer Monitoring the heat accumulation during fabrication of surface micro-patterns on metallic surfaces using direct laser interference patterning Recast-free helical drilling of fused silica using SHG picosecond laser pulses
国立国会図書館
目次Ultra-short pulsed laser marking and coloration of metals with segmented pixel parameter transformation Effect of scan strategy on mechanical properties of AlSi12 lattice fabricated by selective laser melting The influence of laser pulse duration on periodic surface structures on stainless steel High-precision surface profiling using multi-hundred watts ultrashort pulse lasers and ultrafast polygon-mirror based scanner Femtosecond laser drilling of copper : modeling and experiment comparison The design and evaluating method for the scanning strategy in nanosecond laser milling of axisymmetric 3D structure micro cone considering its symmetric errors Laser powder bed fusion of multilayer thin-walled structures based on data-driven model Research on maskless lithography system based on digital oblique scanning strategy Surface modification of forming tools for aluminum sheet metal forming In-situ analysis of heat accumulation during ultrashort pulsed laser ablation
国立国会図書館
目次High pulse repetition frequency micro hole drilling of silicon using ultrashort pulse laser radiation Ultrafast laser structuring within a process chain - influence of the surface morphology Picosecond laser fabrication of the riblet-array surface texture on Ti64 alloy substrate Studies on microdrilling of NbN superconductor using pulsed laser ablation High-speed imaging of a laser ablation process using parallel phase-shifting interferometry Hybrid micro textures : a multi-scale surface engineering approach for enhancing tribological characteristics Investigation of the ablation rate of stainless steel by means of few ultrashort laser pulses up to 150 J/cm² Multi-sensor system for real-time monitoring of laser micro-structuring Absorber-free quasi-simultaneous laser welding for microfluidic applications Laser-induced ejection of a millimeter-sized liquid droplet from a metal surface by IR laser irradiation at three different pulse durations Fabrication of nickel-gold microsensor using in situ laser-induced metal deposition technique
国立国会図書館
目次Antireflection microstructured surface on ZnSe for mid-infrared spectral region Dot line pattern formation in photoresist films by mask-guided LIPSS formation due to excimer laser irradiation High power laser processing with ultrafast and multi-parallel beams Single track of selective laser melting process : modeling and experimental comparison Texturization of engine components with shaped ultrashort laser pulses Formation of unique nanoparticle agglomerates during laser ablation of CaO powders in ethanol An evolving model of surface profile produced by nanosecond laser ablation on aluminum alloy Experimental study on the relationship between direction of crack propagation and thermal stress distribution in laser cleaving process for glass substrate Ablation characteristics of alumina and zirconia ceramics on ultra-short pulsed laser machining Adaption of energy deposition in helical drilling of multidimensional micro holes using ultrashort laser pulses Shifted laser surface texturing (sLST) in burst regime Simple and compact longitudinally excited CO2 laser driven with a fast high-voltage solid-state switch
国立国会図書館
目次Evaluation of key geometrical and mechanical properties for remote laser welded AC-170PX aluminium joints Early stage material motion and transient optical properties of metals after ultrashort laser pulse irradiation Positive effect of laser structured surfaces on tribological performance Fabrication of high aspect ratio channels in fused silica using femtosecond pulses and chemical etching at different conditions Parabolic vector focus wave modes Microfabrication of Au film using optical vortex beam Laser ablation and seeding for the preparation of highly transparent copper conductive networks on glass Ultrafast-laser manufacture of radially emitting optical fiber diffusers for medical applications A new approach to seal polymer microfluidic devices using ultrashort laser pulses Fiber laser based single pulse drilling for production of perforated Titanium sheets for HLFC structures Laser processing high aspect ratio groove wick for improving the thermal performance of flat micro heat pipe Investigation of laser processing of biodegradable nanofiber nonwovens with different laser pulse durations Vector focus wave modes with elliptic cross-section Multimaterial manufacture through combining optical tweezers with multiphoton fabrication In-situ analysis of ultrashort pulsed laser ablation with pulse bursts High-efficiency sub-micrometer multi-beam interference structuring for large-scale surface using ultrashort laser pulses Increasing productivity of ultrashort pulsed laser ablation in advance for a combination process with ns-laser Picosecond pulsed laser ablation of liquid covered stainless steel : effect of liquid layer thickness on ablation efficiency
国立国会図書館
目次Observation of continuous and non-continuous laser induced periodic structures on silicon Hybrid laser scribing and chemical etching technique using pulsed Nd3+:YAG laser to fabricate controlled micro channel profile Vertical microchannels for microfluidic multilayer interconnections in PMMA Laser induced periodic surface structures on 100Cr6 steel for modification of friction demonstrated with Stribeck test Towards a numerical model of picosecond laser-material interaction in bulk sapphire Short and ultrashort pulsed laser processing of zinc : resolidification morphology of ablated craters Laser-induced ejection of millimeter-sized liquid droplet from metal surface with a 1 Joule/pulse ns-laser Fluid cells fabrication in sol-gel and porous glass Effect of corner angle on laser scribing width and depth of Al2O3 ceramics : experiment and numerical simulation Controlling micron and submicron scale laser induced surface structures on stainless steel with industrial femtosecond lasers Laser-induced microplasma as effective tool for phase elements fabrication on amorphous and crystalline materials Pure titanium foil hybrid surface modification using ultraviolet laser micromachining Vector Bessel beams with modified field distribution Tayloring surface properties of rare earth magnesium alloy for biomedical application induced by laser processing Direct laser printing of liver cells on porous collagen scaffolds Cavitation erosion properties of microscale texture surfaces induced by laser processing technique Optical Bessel-like beams with engineered axial phase and intensity distribution Laser processing of silicon suboxide for the fabrication of multilevel fused silica diffractive phase elements Large scale ultrafast laser micro texturing with multi-beams Calculating the borehole geometry produced by helical drilling with ultrashort laser pulses Utilizing fundamental beam-mode shaping technique for top-hat laser intensities in Direct Laser Interference Patterning Multi pulse pump-probe diagnostics for development of advanced transparent materials processing Vector beams with parabolic and elliptic cross-sections for laser material processing applications Influence of climatic changes on the joint strength of laser joined plastic-metal-hybrids Influence of pulse duration on high-precision manufacturing of 3D geometries New approach for assembling dissimilar materials : laser technology On-line interferometric observation of thermomechanically induced refractive index changes during glass welding by ultra-short laser pulses Biomimetic anti-adhesive surface micro-structures of electrosurgical knife fabricated by fibre laser Damage-free ablation process for back-contacted silicon heterojunction solar cells Controllable spatial array of Bessel-like beams with independent axial intensity distributions for laser microprocessing
国立国会図書館
目次Laser-induced backside wet etching of SiO2 with a visible ultrashort laser pulse by using KMnO4 solution as an absorber liquid Multi-material deposition of polymer powders with vibrating nozzles for a new approach of laser sintering Low-profile interconnects via laser-induced forward transfer Protecting sub-micrometer surface features in polymers from mechanical damage using hierarchical patterns Laser micro machining of alumina by a picosecond laser Use of an elastomeric donor for LIFT of metal foils Homogeneous low spatial frequency LIPSS on dielectric materials generated by beam-shaped femtosecond pulsed laser irradiation Heat accumulation effects during ultrashort pulse laser ablation with spatially shaped beams Static and dynamic contact angle of water influenced by femtosecond laser based ripple structures on metals Laser-induced periodic surface structures (LIPSS) on polymers processed with picosecond laser pulses Investigation to increase the welding joint area with modulated laser beam welding over gap Ultrashort pulse processing of transparent ceramics : the role of electronic and thermal damage mechanisms Embedded metal microstructures in glass substrates by a combined laser trenching and printing process Interconnection for power electronics using laser ablation Investigation on laser scanner synchronization via advanced beam path analysis in 3D additive manufacturing systems Erratum : effect of laser irradiation on the properties of ZnO buffer layers and its application to selective-growth of ZnO nano/microcrystals
国立国会図書館
目次High-efficiency nanostructuring using multi-beam interference by consecutively deposited ultrashort laser pulses on tool steel Laser nano-structuring of pre-structured substrates Effect of circular arc radius on laser scribing width and depth of Al2O3 ceramics : experiment and numerical simulation Extremely low ablation rate of metals using XeCl excimer laser Welding of glass and copper with a rough surface using femtosecond fiber laser pulses Effect of the combination of femtosecond laser pulses exposure on the etching rate of fused silica in hydrofluoric acid Ultrafast laser helical drilling of three-dimensional shaped holes using synchronized adaption of energy deposition An improved scanning strategy for long pulsed laser drilling of carbon fiber textiles
国立国会図書館
目次Comparative study of refractive index sensing based on three different long-period grating configurations by pulsed ArF excimer laser Surface alloying of titanium using a nanosecond laser with a light-transmitting resin Resistance measurement of laser welded dissimilar Al/Cu joints Investigation of Nd3+:YAG laser aided surface texturing to improve tribological characteristics of piston ring Water-assisted laser drilling for miniature internal thread in glass and evaluation of its strength Characterization of refractive index change induced by femtosecond laser in lithium niobate Laser-induced superhydrophobic Ti-Ni shape memory alloy with corrosion resistance and self-cleaning properties The characteristic of birefringence and optical loss in femtosecond-laser-induced region in terms of nanogratings distribution Nanosecond laser treatment of a-Si thin films for enhanced light trapping and minority carrier lifetime in photovoltaic cells Time-resolved reflectivity and temperature measurements during laser irradiation of crystalline silicon Thermal damage of carbon fiber reinforced plastic by IR fiber laser irradiation Laser drop on demand micro joining for high temperature wire bonding applications : system technology and mechanical joint performance Fabrication of micropits by LIBWE for laser marking of glass materials Stable products of laser-induced breakdown of aqueous colloidal solutions of nanoparticles Optimizing the specific removal rate with the burst mode under varying conditions Laser micromachining of metals with ultra-short pulses : factors limiting the scale-up process 3D nano-fabrication using controlled Bessel-glass interaction in ultra-fast modes Fast fabrication of multilevel phase plates used for laser beam correction Laser processing of dry, wet and immersed polyamide nanofiber nonwovens with different laser sources Efficient metal processing using high average power ultrafast laser Copper nanoparticles by laser ablation confined in methanol in the presence of an argon gas environment Laser percussion drilling of high temperature alloy and qualitative/ quantitative characterization Laser patterning of thin film copper and ITO on flexible substrates for terahertz antenna applications Drilling of through holes in sapphire using femtosecond laser pulses
書誌情報
この資料の詳細や典拠（同じ主題の資料を指すキーワード、著者名）等を確認できます。
- 資料種別
- 電子書籍・電子雑誌
- ISSN
- 1880-0688
- ISSN-L
- 1880-0688
- 本文の言語コード
- eng
- 国立国会図書館永続的識別子
- info:ndljp/pid/8426207
- コレクション（個別）
- 国立国会図書館デジタルコレクション > 電子書籍・電子雑誌 > 学術機関 > 学協会
- 収集根拠
- オンライン資料収集制度
- 受理日（W3CDTF）
- 2014-02-20T10:15:13+09:00