巻号一覧
全55件
国立国会図書館
目次Copper particles generated during in situ laser-induced synthesis exhibit catalytic activity towards formation of gas phase Study on site-specific polishing of polycrystalline diamond film by KrF excimer laser Two-dimensional low spatial frequency laser-induced periodic surface structuring of sapphire Femtosecond-laser-induced defects on silicon carbide probed by electrical conductivity Fabrication of cylindrical lenses by combining ultrashort pulsed laser and CO2 laser Two-photon direct laser writing for proteinaceous microstructures with additional sensitizer Optical trap assisted nanopatterning : process parallelization and dynamic structure generation Stress-assisted shock-wave-induced thin-film delamination (SWIFD) of CIGS on a flexible substrate Increasing the specific removal rate for ultra short pulsed laser-micromachining by using pulse bursts Influence of wavelength on glass welding by ultra-short laser pulses Multipoint measurement using an inline fibre optic spectrometer fabricated with a 400 nm femtosecond laser Suppression of stress and crack generation in local glass melting by picosecond laser irradiation at a high repetition rates with temporal energy modulation Removal processing inside PDMS by short pulse laser Laser induced rectangular microstructures for surface of cavitation erosion resistance UV laser photo-polymerization of elastic 2D/3D structures using photo-curable PDMS (polydimethylsiloxane) Observation of stress wave and thermal stress in ultrashort pulse laser bulk processing inside glass Tuning the structures and properties of porous graphene in laser-induced graphitization Electroless deposition of confined copper layers based on selective activation by pulsed laser irradiation Experimental investigation of speckle pattern by laser scribing for digital image correlation Regeneration of a grating in PMMA inscribed by femtosecond laser Bessel beam Effect of picosecond laser based modifications of amorphous carbon coatings on lubricant-free tribological systems
国立国会図書館
目次Laser cleaning technique using laser-induced acoustic streaming for silicon wafers Laser surface processing of hot rolled Ni-45.0at.%Ti shape memory alloy Laser direct writing of highly conductive circuits on modified polyimide Nanotribological properties of nanotextured Ni-Co coating surface measured with AFM colloidal probe technique Laser texturing of NiTi alloy with enhanced bioactivity for stem cell growth and alignment Numerical construction of nonlinear optical evolution of femtosecond laser pulse propagation in air based on 2D+1 NLSE full model Design of interbody fusion cages of Ti6Al4V with gradient porosity using a selective laser melting process for spinal fusion arthroplasty Pulsed green laser induced regular stripes on kerf sidewall of sapphire substrate Erratum: "a single-step process of generating hollow and porous TiO2 nanoparticles by picosecond laser ablation in deionised water" : [J. Laser Micro/Nanoeng. Vol.,11 (2016) 326-332]
国立国会図書館
目次Laser direct writing and photonic manufacturing of microball lens for wide-angle imaging, energy devices, and sensors on flexible substrates Study of generating sub-diffraction-limit patterns with the phase modulation of polarized beams Analysis and evaluation of boundary conditions for direct surface structuring by Multi-Beam Interference Influence of polarization state on ultrafast laser-induced bulk nanostructuring Simple synthesis of Ag nanoparticles arranged in 1D and 2D grating-like structures Direct fabrication of submicron-size periodic structures by backside irradiation Waveguide fabrication in Yb3+ doped phosphate glass by 50 kHz repetition rate ultrafast laser A single-step process of generating hollow and porous TiO2 nanoparticles by picosecond laser ablation in deionised water Laser direct writing of copper circuits on flexible substrates for electronic devices Fabrication of P-, Sb-, and Mg-doped ZnO spherical microcrystals by laser ablation in air Formation of micro-lens array using femtosecond and CO2 lasers Modification and dynamics inside diamond by femtosecond laser double-pulse irradiation Bessel-like beam array generation using round-tip micro-structures and their use in the material treatment Initial cumulative effects in femtosecond pulsed laser-induced periodic surface structures on bulk metallic glasses Development of a mathematical model relating microstructures evolvement to optical appearance of laser-induced polychrome oxides on iron substrates Deep-trench structure of carbon-fiber-reinforced thermoplastics (CFRTP) by laser cutting with a single-mode IR fiber laser Laser structuring for control of coupling between THz light and phonon modes Monitoring of the femtosecond laser micromachining process of materials immersed in water by use of laser-induced breakdown spectroscopy Laser thin film patterning for rapid prototyping and customised production of flexible electronics devices Laser micromachining of PEDOT:PSS/Graphene thin films by using beam shaping technology Advances in 193 nm lasers for Fiber Bragg grating manufacturing Erratum : "minimizing stitching errors for large area laser surface processing" Erratum : "experimental investigation of dimensional variation in laser-machined micro-channels produced in titanium alloy
国立国会図書館
目次Formation of through holes in glass substrates by laser-assisted etching Biomimetic coatings on fiber laser modified Ti-6Al-4V surfaces Influence of Cu addition to improve shape memory properties in NiTi alloys developed by laser rapid manufacturing Silver nanoparticles by laser ablation confined in alcohol using an argon gas environment Capabilities of laser-induced marks as information carriers created in different materials Twin gas jet-assisted pulsed green laser scribing of sapphire substrate Pulsed Nd³+ : YAG laser assisted micro-dimple formation in chromium films under different ambient conditions Minimizing stitching errors for large area laser surface processing High density perforation of thin Al-foils with ultra short pulse lasers in dependence on the repetition rate High speed photography of laser induced forward transfer (LIFT) of single and double-layered transfer layers for single cell transfer Laser processing of sub-wavelength structures on sapphire and alumina for millimeter wavelength broadband anti-reflection coatings Experimental investigation of dimensional variation in laser-machined micro-channels produced in titanium alloy Effects of laser peening parameters on plastic deformation in stainless steel Processing of back surface of Si wafers with a pulsed Nd : YAG laser Isolation scribing on hybrid films for CIGS-based solar cell using various nanosecond pulsed laser wavelengths Local photorefractive modification in lithium niobate using ultrafast direct laser write technique Surface modification of polystyrene by femtosecond laser irradiation Picosecond laser modification of CIGS active layer Fabrication and application of phase only holograms for high power laser beam shaping Influence of alignment and dispersion pattern of carbon nanotubes in the polycarbonate and polystyrene matrixes on laser cutting workability Update of EUV source development status for HVM lithography
国立国会図書館
目次The development of a long-stroke precision positioning stage for micro fabrication by two-photon polymerization Frequency modulation and device repaired by laser surface treatment in film bulk acoustic filters A preventive measure against fiber damage of a femtosecond 1.55-µm er-doped fiber laser system using multimode optical fiber Effects of deposition pressure and target-substrate distance on growth of ZnO by femtosecond pulsed laser deposition Investigation of thermochemical reaction of metallic grooves manufactured with laser micromachining in liquid Optical glass substrates forming processes using pulsed ultravioletlaser micromilling technology Nanostructuring in indirect band-gap semiconductor using IR femtosecond double pulses Mask assisted laser percussion drilling Micro scribing of copper and aluminum thin films in air and water using pulsed Nd³+ :YAG Laser Internal to external microfluidic device for ellipsometric biosensor application Femtosecond laser processing of polymethyl methacrylate with an axicon Ultrashort pulse laser cutting of glass by controlled fracture propagation SiC thin film growth on different substrates using pulsed Nd³+:YAG laser deposition Self-assembled nanostructures inside indirect bandgap semiconductor by using IR femtosecond double-pulses Micromachining of transparent, semiconducting and metallic substrates using femtosecond laser beams Nanogratings embedded in Al2O3-Dy2O3 glass by femtosecond laser irradiation The shape of the exfoliated surface during femtosecond laser ablation Control of periodic nanostructure embedded in SiO2 glass under femtosecond double-pulse irradiation Minimizing the surface roughness for silicon ablation with ultrashort laser pulses Laser cutting of carbon fiber reinforced plastics (CFRP and CFRTP) by IR fiber laser irradiation High temperature laser based drop on demand micro joining of thin metallic layers or foils using bronze braze preforms High-quality surface micromachining on polymer using visible-LIBWE Innovative strategies for the removal of organic compounds in nanoparticle ITO layers Femtosecond laser scribing of Cu(In,Ga)Se2 thin-film solar cell Influence of polishing orientation on the generation of LIPSS on stainless steel
国立国会図書館
目次Towards optimized efficiency of ablation in copper using a 515nm picosecond laser process Experimental study on laser surface texturing for friction coefficient enhancement Nanosecond laser processing of soda-lime glass Effect of laser irradiation on the properties of ZnO buffer layers and its application to selective-growth of ZnO nano/microcrystals Fabrication of columnar sub-microstructures using a Q-switched Nd:YAG laser in the nanosecond time regime Influence of pulsed fiber laser radiation on surface morphology and electrical properties of Si/SiO2 structure Selective femtosecond laser lift-off process for scribing in thin-film photovoltaics Cutting and drilling of SiC semiconductor by fiber laser Simulation of laser structuring of thin-film solar cells High repetition laser shock peening on magnesium based biodegradable alloys Modification of the CdTe-In Interface by irradiation with nanosecond laser pulses through the CdTe crystal Evaluation of scanner-based focus finding methods on rough surfaces Fabrication of porous Ti structures with nanostructures from Ti powders by femtosecond laser pulses Low-temperature diffusion at Ni/SiC interface with the aid of femtosecond laser-induced strain Fast and slow dynamics in femtosecond laser-induced crack propagation inside a LiF single crystal Residual heat in ultra-short pulsed laser ablation of metals Laser melting in liquids using gold nanoparticles stabilized by Na2CO3 Influence of laser beam profile on Nd³+:YAG laser assisted formation of polycrystalline-Si films in underwater conditions Bringing the direct laser interference patterning method to industry : a one tool-complete solution for surface functionalization
国立国会図書館
目次Comparison of the production of nanostructures on bulk metal samples by picosecond laser ablation at two wavelengths for the fabrication of low-reflective surfaces Evidence of pressure waves in confined laser ablation Direct laser writing of a channel waveguide in Al2O3:Nd thin film Ripple formation by femtosecond laser pulses for enhanced absorptance of stainless steel Doubling silicon ablation process efficiency and improving quality using high power high repetition rate green laser with TimeShift TM capability Realization of multi-material polymer parts by simultaneous laser beam melting Investigation of optical interconnection by using photonic wire bonding Imaging of the ejection process of nanosecond laser-induced forward transfer of gold Large area silica nano grids by homogeneous high resolution laser patterning of SiOx-films Optical characterization of ZnO microsphere produced by laser ablation in air Build-up of a resin composite core in a fiber-reinforced post by a 2.78 μm-pulsed laser treatment Nanoparticle generation from Nitinol target using pulsed laser ablation High-contrast laser marking of microelectronic packaging modules Theoretical analysis of non-ablative laser texturing of silicon surface with a continuous wave fiber laser Sub-wavelength uniform periodic surface structures induced by low femtosecond laser fluence on silicon with optical glass covering Back side ablation of SiC diodes using a q-switched NIR laser Laser patterning of smart nanomaterials for reel-to-reel production of organic photovoltaic (OPV) devices Experimental investigation and optimization for the effective parameters in the laser direct structuring process Simulation of the reflectivity properties of microstructured titanium surface by ray tracing method Towards dynamic holographic laser beam shaping Femtosecond pulse light filament-assisted microfabrication of biodegradable polylactic acid (PLA) material Dicing of thin silicon wafers with ultra-short pulsed lasers in the range from 200 fs up to 10 ps Development of a path generation algorithm for large-area laser patterning using a manual-input control-point
国立国会図書館
目次Parameters of influence in surface ablation and texturing of metals using high-power ultrafast laser Excimer laser-produced biodegradable photopolymer scaffolds do not induce immune rejection in vivo Laser-induced Black-body Heating (LIBBH) as a Method for Glass Surface Modification 3D laser structure modification of photochromic nanocomposites based on porous glass Wetting properties modification of TiO2 layer by femtosecond UV pulses Time-resolved micro-raman measurement of temperature dynamics during high-repetition-rate ultrafast laser microprocessing Femtosecond-laser-induced nanostructure and high ablation rate observed on nitrided alloy steel Comparative study on grating fabrication in transparent materials by TWIN-LIBWE and ultrashort pulsed ablation techniques Irradiation of diamond-like carbon films by picosecond laser pulses Optical and magnetic microstructures in YIG ferrite fabricated by femtosecond laser Fabrication of polarizer by metal evaporation of fused silica surface relief gratings Improvement of cut quality in rapid-cutting of glass method via femtosecond laser filamentation Work piece identification based on plasma emission analysis for customized laser processing Comparative study of the surface nanostructure formation on different surfaces generated by low number of fs laser pulses Oblique drilling by Ti:sapphire fs laser in silicon Initial thermal response of micro/nano-Al particle embedded in energetic materials excited by single-pulse laser Integration of fresnel zone plates in the bulk of sapphire crystal by femtosecond laser pulses Straight through hole drilling in machinable ceramics Scanned mask imaging solid state laser tool for cost effective flip chip - chip scale package manufacture
国立国会図書館
目次Ultrafast laser processing of glass Laser-induced forward transfer of functional materials : advances and future directions Laser scribing on silver flexible substrate with beam shaping technology Control of electrical resistance and temperature of titanium dioxide film by local heating with CW fiber laser Improvement of junction properties of ZnO nanorod/GaN heterojunction using selective laser processing Rapid cutting and drilling of transparent materials via femtosecond laser filamentation Demonstration of heat resistant fiber bragg grating sensors based on femtosecond laser processing for vibration monitoring and temperature change Measuring method for the interference contrast of Multi-Beam-Interference A simplified fabrication technique for tilted fiber bragg grating for the simultaneous measurement of refractive index and temperature of liquids Periodic grating structures on metal self-organized by double-pulse irradiation Laser processing by using multi level free form 3D micro-fabricated DOE Hybrid micro-stereo-lithography by means of aerosol jet printing technology Fabrication of microenvironments with different geometrical features for cell growth studies Processes at multi-pulse laser embossing of submicron surface structures Flexible patterning of functional microdot by laser-induced dot transfer Consideration of a local aluminum-induced crystallization process guided along the μ-ｈoles fabricated with fs laser pulses Grayscale marking of anodized aluminium plate by using picosecond laser and galvanometer scanner Free-shape 3D structure formation in bulk fused silica by irradiation with femtosecond laserpulses Spatially modulated laser beam micro welding of CuSn6 and nickel-plated DC04 steel for battery applications
国立国会図書館
目次Microstructure of MC-Fe composite layer on carbon steel by laser surface alloying Ablation of copper by a single ultrashort laser pulse Laser tool for single cell transfer Modification and machining on back surface of a silicon substrate by femtosecond laser pulses at 1552 nm Ultrashort pulse laser cutting of intraocular lens polymers Development of ultrashort pulsed VUV laser and its applications Miniaturized reaction chamber for optimized laser-assisted carbon nanotube growth Ti:sapphire laser ablation of silicon in different ambients Selective, laser-induced etching of fused silica at high scan-speeds using KOH Plasmonically coupled faraday effect in Fe- and Au-doped silicate glasses irradiated with femtosecond laser Time-resolved soft x-ray imaging of femtosecond laser ablation processes on metals Passivation of silicon surface by laser rapid heating Mid-infrared resonant ablation of PMMA Investigation on flexural strength changes of alumina caused by cutting using fiber laser Highspeed laser micro processing using ultrashort laser pulses Three phase boundary enhancement in SOFC anodes by applying laser drilling technique Laser-induced structural modifications inside glass using a femtosecond laser and a CO2 laser Laser cutting of carbon fiber reinforced thermo-plastic (CFRTP) by IR laser irradiation
書誌情報
この資料の詳細や典拠（同じ主題の資料を指すキーワード、著者名）等を確認できます。
- 資料種別
- 電子書籍・電子雑誌
- ISSN
- 1880-0688
- ISSN-L
- 1880-0688
- 本文の言語コード
- eng
- 国立国会図書館永続的識別子
- info:ndljp/pid/8426207
- コレクション（個別）
- 国立国会図書館デジタルコレクション > 電子書籍・電子雑誌 > 学術機関 > 学協会
- 収集根拠
- オンライン資料収集制度
- 受理日（W3CDTF）
- 2014-02-20T10:15:13+09:00