本文へ移動
溶媒抽出法を用いた使...

溶媒抽出法を用いた使用済み無電解ニッケルめっき液からのニッケルリサイクルに関する研究 (特集 地球環境とリサイクル)

記事を表すアイコン

溶媒抽出法を用いた使用済み無電解ニッケルめっき液からのニッケルリサイクルに関する研究(特集 地球環境とリサイクル)

国立国会図書館請求記号
Z17-725
国立国会図書館書誌ID
10784734
資料種別
記事
著者
田中 幹也ほか
出版者
東京 : 化学工学会
出版年
2010
資料形態
掲載誌名
化学工学論文集 36(3・4) 2010.5・7
掲載ページ
p.201~206
詳細を見る

全国の図書館の所蔵

国立国会図書館以外の全国の図書館の所蔵状況を表示します。

所蔵のある図書館から取寄せることが可能かなど、資料の利用方法は、ご自身が利用されるお近くの図書館へご相談ください

その他

書誌情報

この資料の詳細や典拠(同じ主題の資料を指すキーワード、著者名)等を確認できます。

資料種別
記事
著者・編者
田中 幹也
成田 弘一
齋木 幸則
並列タイトル等
Nickel recycling from spent electroless nickel plating baths using solvent extraction
タイトル(掲載誌)
化学工学論文集
巻号年月日等(掲載誌)
36(3・4) 2010.5・7
掲載巻
36
掲載号
3・4
掲載ページ
201~206
掲載年月日(W3CDTF)
2010
ISSN(掲載誌)
0386-216X
ISSN-L(掲載誌)
0386-216X
出版事項(掲載誌)
東京 : 化学工学会
出版地(国名コード)
JP
本文の言語コード
jpn
NDLC
対象利用者
一般
所蔵機関
国立国会図書館
請求記号
Z17-725
連携機関・データベース
国立国会図書館 : 国立国会図書館雑誌記事索引
書誌ID(NDLBibID)
10784734
整理区分コード
632

デジタル

要約等
Demand is growing for the recovery of nickel from spent electroless nickel plating baths (spent bath). The present authors have been studying the application of solvent extraction to this problem, and their findings are outlined in this review. On the basis of batch extraction experiments, a recycling process was established consisting of two steps: (i) impurity removal, followed by (ii) nickel recovery. In step (i), iron and zinc as impurities in the spent baths are selectively removed using acidic organophosphorous reagent such as PC88A. In step (ii), after increasing the pH to around 6, nickel in the spent baths is extracted using the chelating reagent LIX84I as an extractant aided by a small amount of PC88A as an accelerator. The nickel in the organic phase formed is stripped with 1–2 mol/dm<sup>3</sup> of sulfuric acid in order to obtain nickel sulfate solution, which is reused in the plating process. After the nickel extraction step had been validated by the continuous multistage experiment, in which high efficiencies were obtained during the extraction and stripping, this process was introduced in a plating plant and has been stably operated for more than one year. The bath life extension gained by removing impurities or byproducts using solvent extraction was also studied. Zinc in the strike nickel plating bath used for plating on an aluminum surface treated with zincate solution was found to be selectively removed using acidic organophosphorous reagent. This zinc removal process was installed in the plating plant and succeeded in extending the life of the strike bath by 3–5 times.
使用済みの無電解ニッケルめっき液(使用済み液)からニッケルを回収しリサイクルする技術が求められている.本稿では,筆者らが研究してきた,溶媒抽出法を適用した技術を紹介する.バッチ実験の結果に基づき,まず酸性有機リン抽出剤であるPC88Aを用いて使用済み液中の不純物である鉄や亜鉛を選択的に除去し,その後pHを6付近に上げて,キレート試薬であるLIX84Iに少量のPC88Aを加速剤とした有機相を用いてニッケルを抽出し,得られる有機相を1–2 mol/dm<sup>3</sup>の硫酸で逆抽出することにより,ニッケルを硫酸ニッケル溶液として回収し,めっき工程で再使用するプロセスを開発した.向流多段操作の実験も行い,高効率でニッケルを回収できることを確認し,めっき工場において実用に供することができた.まためっき液中の不純物や副生成物を除去することによるめっき液長寿命化の研究も併せて行ったところ,アルミ表面へめっきする際に用いるストライクめっき液に蓄積する亜鉛を,酸性有機リン抽出剤を用いて選択除去し,ストライクめっき液の寿命を3–5倍に延ばすプロセスを確立した.
DOI
10.1252/kakoronbunshu.36.201
オンライン閲覧公開範囲
インターネット公開
連携機関・データベース
科学技術振興機構 : J-STAGE

デジタル

要約等
使用済みの無電解ニッケルめっき液(使用済み液)からニッケルを回収しリサイクルする技術が求められている.本稿では,筆者らが研究してきた,溶媒抽出法を適用した技術を紹介する.バッチ実験の結果に基づき,まず酸性有機リン抽出剤であるPC88Aを用いて使用済み液中の不純物である鉄や亜鉛を選択的に除去し,その後pHを6付近に上げて,キレート試薬であるLIX84Iに少量のPC88Aを加速剤とした有機相を用いてニッケルを抽出し,得られる有機相を1–2 mol/dm<sup>3</sup>の硫酸で逆抽出することにより,ニッケルを硫酸ニッケル溶液として回収し,めっき工程で再使用するプロセスを開発した.向流多段操作の実験も行い,高効率でニッケルを回収できることを確認し,めっき工場において実用に供することができた.まためっき液中の不純物や副生成物を除去することによるめっき液長寿命化の研究も併せて行ったところ,アルミ表面へめっきする際に用いるストライクめっき液に蓄積する亜鉛を,酸性有機リン抽出剤を用いて選択除去し,ストライクめっき液の寿命を3–5倍に延ばすプロセスを確立した.
参照
高機能吸着材による資源循環型排水処理
高圧力下での無電解ニッケル–リンめっき
Preparation of Carbonaceous Sulfur-impregnated Adsorbent from Rice Straw for Nickel Recovery from Nickelplating Waste Solution
エマルションフロー抽出法による 使用済み無電解ニッケルめっき液からのニッケルリサイクル
Continuous Liquid-Liquid Extraction of Nickel from Simulated Electroless Nickel Plating Liquid Wastes by a Using Counter Current Emulsion flow Extractor
Separation and Recovery of Nickel from Waste Electroless Nickel-Phosphorous Plating Solution
Quantification of Iodine Mass Transfer and Height of Emulsion Phase in “Emulsion-flow” Column
Application of Queueing Theory and Foam Drainage Model to Enhance Understanding of Droplet Layer in Emulsion-flow Column Extractor
参照
Extraction Rate of Nickel with 5-Dodecylsalicylaldoxime in a Vibro-Mixer
Metal complexation at the liquid-liquid interface
Structure of the Extracted Complex in the Ni(II)‐LIX84I System and the Effect of D2EHPA Addition
Nickel extraction from acidic chloride solutions with aliphatic oximes
Solvent extraction equilibria of copper and nickel with SME 529
Analysis of continuous solvent extraction of nickel from spent electroless nickel plating baths by a mixer-settler
Effect of stirring on the distribution equilibriums of n-alkyl-substituted dithizones
Recovery of metal values from spent hydrodesulfurization catalysts by liquid-liquid extraction
Solvent extraction recovery of nickel from spent electroless nickel plating baths by a mixer-settler extractor
21世紀を支える表面技術  無電解ニッケルめっき老化液処理の現況
Holdup of dispersed phase in a mixer-settler extraction column.
振動型反応器を用いたトリ-n-オクチルアミンのトルエン溶液による亜リン酸の抽出速度の解析
Acorga P-5100による塩酸溶液からのCu (II) の溶媒抽出平衡
LIX84Iを用いた溶媒抽出法による使用済み無電解ニッケルめっき浴からのニッケルの分離回収
種々の抽出剤によるアンモニウム塩水溶液からの金属イオンの溶媒抽出
Interfacial Phenomena in the Extraction Kinetics of Nickel(II) with 2′-Hydroxy-5′-nonylacetophenone Oxime
閉鎖循環型連続抽出装置を用いた 無電解ニッケルめっき廃液からの酸成分の分離回収
無電解ニッケルめっき廃液処理への溶媒抽出法の適用
溶媒抽出法による使用済み無電解ニッケルめっき浴からの金属成分の分離
LIX84Iによるニッケルの溶媒抽出における正および逆抽出速度の改善
連携機関・データベース
国立情報学研究所 : CiNii Research
書誌ID(NDLBibID)
10784734
NII論文ID
10027040534