並列タイトル等Prediction of the Volume Loss by Using Slurry Jet Test on SCS6
一般注記Slurry erosion with sand particles is a serious problem for pumps operating at the Yellow River pumping station. Therefore, a technique to predict erosion volume loss is required for selecting erosion resistant material and determining specification of the maintenance period. This paper reports a method to predict the volume loss of SCS6 specimen using slurry jet apparatus. An equation for prediction is derived from combining an analysis of sand particle behavior in the slurry jet apparatus with measurement of surface profile on specimens obtained by slurry jet test by silica sand of approx. 60 μm in mean diameter. There is a critical value for kinetic energy of particle above which erosion occurs, being about 1.0×10^<-6>N・m for SCS6. It was found that the loss was a maximum at an impingement angle of about 40 degrees. The equation can predict the amount of volume loss on the slurry jet test with the Yellow River sand of approx. 30 μm in mean diameter.
連携機関・データベース国立情報学研究所 : 学術機関リポジトリデータベース（IRDB）（機関リポジトリ）