並列タイトル等Fundamental Study on Cavitatit Erosion Using a NiTi Shape Memory Alloy
一般注記In order to clarify the role of slip deformation on cavitation erosion, vibratory cavitation tests were carried out for a NiTi shape memory alloy in martensitic phase and austenitic phase. This alloy deforms plastically by the combination of slip and twinning deformation, and the erosion resistance of NiTi shape memory alloy is 500 to l 000 times higher than that of SUS316 stainless steel. The erosion resistance of austenitic phase is superior to martensitic phase, because the accumulation of slip in the austenitic phase is slower due to the superelasticity than that in the martensitic phase. The martensitic phase test with intermittent shape recovery shows a better resistance without the shape recovery, since the deformation twins produced by cavitation erosion test are eliminated by shape recovery, resulting in the delay of slip accumulation. However, the amount of shape recovery was decreased with test duration. The decreasing rate of shape recovery has a good linear relationship with the volume loss rate. It was concluded that the accumulation of slip deformation corresponds well with the volume Ivss rate.
一次資料へのリンクURLhttps://u-fukui.repo.nii.ac.jp/?action=repository_action_common_download&item_id=22706&item_no=1&attribute_id=22&file_no=1
連携機関・データベース国立情報学研究所 : 学術機関リポジトリデータベース（IRDB）（機関リポジトリ）