文書・図像類
2成分系溶液内凝固過程の動的挙動とその制御に関する研究
資料に関する注記
一般注記:
- In this study solidification process of binary aqueous solution is investigated. Main goal of the present work is to develop a one-dimensional approxi...
関連資料・改題前後資料
https://kaken.nii.ac.jp/search/?qm=70272953
https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-14550174/
https://kaken.nii.ac.jp/report/KAKENHI-PROJECT-14550174/145501742004kenkyu_seika_hokoku_gaiyo/
書店で探す
全国の図書館の所蔵
国立国会図書館以外の全国の図書館の所蔵状況を表示します。
所蔵のある図書館から取寄せることが可能かなど、資料の利用方法は、ご自身が利用されるお近くの図書館へご相談ください
書店で探す
書誌情報
この資料の詳細や典拠(同じ主題の資料を指すキーワード、著者名)等を確認できます。
デジタル
- 資料種別
- 文書・図像類
- 著者・編者
- 木村, 繁男Kimura, Shigeo
- 出版事項
- 出版年月日等
- 2005-03-01
- 出版年(W3CDTF)
- 2005-03-01
- 並列タイトル等
- Dynamic Solidification of Binary Aqueous Solution
- タイトル(掲載誌)
- 平成16(2004)年度 科学研究費補助金 基盤研究(C) 研究成果報告書 = 2004 Fiscal Year Final Research Report
- 巻号年月日等(掲載誌)
- 2002-2004
- 掲載巻
- 2002-2004
- 掲載ページ
- 3p.-
- 本文の言語コード
- jpn
- 件名標目
- 対象利用者
- 一般
- 一般注記
- In this study solidification process of binary aqueous solution is investigated. Main goal of the present work is to develop a one-dimensional approximate model to predict the time-dependent behavior of the solid layer growth and decay. Since the solid layer formed in the aqueous solution becomes mushy (a porous layer), we first study the solidification in the water-saturated porous medium. Particularly the solid layer response when the cooling temperature varies with time is our major interest. One-dimensional model is developed in order to predict the temporal solid layer thickness. Experiments using a cubic container filled with water-saturated glass beads are carried out for testing the validity of the proposed one-dimensional model. Two-dimensional numerical analysis is also performed for the same purpose. It is found that the proposed one-dimensional model accurately predicts the both experimental and numerical results. Next we extend our one-dimensional model to solidification o f binary aqueous solution. Assuming the constant solid fraction in the mushy layer and the specified heat flux at the solid-fluid interface, which is effectively simulating the convective heat flux at the interface, the time-dependent heat conduction equation in the solid layer (mushy layer) and the thermal energy balance at the interface are combined to yield the transcendental equation for the unknown thickness of the mushy layer. Experiments are also carried out using the cubic container filled with aqueous sodium nitrate. Two different thermal boundary conditions are employed ; one is cooled from above, and the other is cooled from below. The former is characterized by the presence of vigorous convection in the liquid region, while the latter is dominated by diffusion. The solid-layer thickness and the solid fraction in the mush predicted by one-dimensional model again agree well with the experimental results, for the both thermal boundary conditions. It is found that the solid fraction in the mush formed by cooling from above has greater values than those by cooling from below. This is due to the different concentration of the interstitial solution in the mush. Since the mass diffusion is very small relative to thermal diffusion, the concentration in the interstice tends to accumulate when the system is cooled from below. We also investigate mixed convection heat transfer from a vertical cooled or heated cylinder. This has an important application for evaluating heat transfer rate of geothermal heat exchangers.本研究では、2成分溶液内での凝固過程の動的挙動に着目し、そのプロセス(固化領域の厚さ及び凝固速度)を制御するために、簡便でかつ実用的に十分な精度を有する非定常一次元凝固解析モデルを提案することを目的とした。2成分溶液内での凝固はマッシー層(一種の多孔質層)を形成するため、まず水で飽和した多孔質層内での凝固過程について検討した。冷却面温度を変化させた時の固相厚さの変動について1次元モデルを提案し、2次元数値シミュレーションと実験結果と比較して良く一致することが確認できた。1次元モデルは液相域で対流が活発な場合も熱伝導が支配的な場合も共に凝固層の厚さ変動をよく説明することを確認した。次に2成分水溶液を用いた凝固現象について検討を行なった。18cmx18cmx18cmの矩形水槽と硝酸ナトリウムを用いた室内実験を併せて行い、同モデルの妥当性を検証した。境界条件は上方冷却と下方冷却の二種類について実験と解析を行なった。上方冷却の場合は水溶液の密度分布は不安定となり、活発な自然対流が発生する。また、固相の成長に伴い溶質の排出があるため、液相内ではほぼ一様に濃度が増加して行くのが認められた。これは液相部が自然対流により活発に撹拌されていることを示している。実際液相内での鉛直方向温度分布は典型的な逆S字形となっており、温度差に基づく対流が支配的であることが確認できた。また、固液界面の不安定現象により固相は針状結晶の集合体でマッシー層を形成することになる。マッシー内の固相率が一定であると仮定して鉛直方向の1次元モデルを提案し、固相成長の経時変化を精度良く予測することが出来た。下方冷却についても同様のモデルを提案し、下方冷却面から成長する固相(マッシー層)の成長を予測することが出来た。さらに地中熱交換器の集熱量予測に関連して、鉛直円柱周りの凝固と自然対流を解析した。最後に対流熱伝達が関与する1次元凝固モデルと同様の考えに基づいて、熱伝導と対流が同時に存在する連成熱伝達問題を検討し、有限の熱伝導率を有する壁が2つの温度の異なるレザバーを隔てている時の平均熱流束を予測する簡便なモデルを提案し、実験によりその有用性を確認した。研究課題/領域番号:14550174, 研究期間(年度):2002–2004, 平成16(2004)年度 科学研究費補助金 基盤研究(C) 研究成果報告書の一部(概要)を掲載出典:「2成分系溶液内凝固過程の動的挙動とその制御に関する研究」研究成果報告書 課題番号14550174 (KAKEN:科学研究費助成事業データベース(国立情報学研究所)) 本文データは著者版報告書より作成
- 一次資料へのリンクURL
- https://kanazawa-u.repo.nii.ac.jp/?action=repository_action_common_download&item_id=34776&item_no=1&attribute_id=26&file_no=1
- オンライン閲覧公開範囲
- 限定公開
- 著作権情報
- CC BY-NC-ND
- 関連情報
- https://kaken.nii.ac.jp/search/?qm=70272953https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-14550174/https://kaken.nii.ac.jp/report/KAKENHI-PROJECT-14550174/145501742004kenkyu_seika_hokoku_gaiyo/
- 連携機関・データベース
- 国立情報学研究所 : 学術機関リポジトリデータベース(IRDB)(機関リポジトリ)
- 提供元機関・データベース
- 金沢大学 : 金沢大学学術情報リポジトリKURA