並列タイトル等Improvement of Machining Characteristics of Micro Wire Electrochemical Machining with Short Voltage Pulses
タイトル(掲載誌)平成26(2014)年度 科学研究費補助金 研究活動スタート支援 研究成果報告書 = 2014 Fiscal Year Final Research Report
一般注記金沢大学理工研究域機械工学系
電解加工は工具電極が消耗せず,加工変質層が生じないという優れた特徴を持つ.また,非接触加工であるため微細加工に適している.本研究では,直径数μmから数十μmの細径ワイヤ電極を工具として使用するワイヤ電解加工機を開発した.そして,印可電圧や電解液供給方法などの加工条件が溝幅などの加工特性に与える影響を明らかにした.その結果,最適な加工条件を用いることで,直径5μmの極細径ワイヤ電極による溝幅8μmのスリット加工を実現した.
Electrochemical machining (ECM) is one of the most effective methods for micro machining since the machining is carried out without a contact between the tool electrode and workpiece. Moreover, since the tool electrode wear does not occur, a thin wire electrode can be used as the tool electrode. In this study, micro wire ECM machine was newly developed, and machining characteristics of wire ECM were investigated. Micro grooves were machined using thin wires with a diameter of several micrometer to several tens of micro meter, and optimal machining conditions were derived to decrease the groove width. As a result, a micro groove with a width of 8μm could be successfully machined using a wire electrode of 5μm in diameter.
研究課題/領域番号:25889029, 研究期間(年度):2013-08-30 - 2015-03-31
一次資料へのリンクURLhttps://kanazawa-u.repo.nii.ac.jp/?action=repository_action_common_download&item_id=45880&item_no=1&attribute_id=26&file_no=1
関連情報https://kaken.nii.ac.jp/search/?qm=20707591
https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-25889029/
https://kaken.nii.ac.jp/report/KAKENHI-PROJECT-25889029/25889029seika/
連携機関・データベース国立情報学研究所 : 学術機関リポジトリデータベース(IRDB)(機関リポジトリ)