並列タイトル等Control of microstructure and segregation in a solidifying eutectic alloy
タイトル(掲載誌)平成27(2015)年度 科学研究費補助金 基盤研究(C) 研究成果報告書 = 2015 Fiscal Year Final Research Report
一般注記金沢大学環日本海域環境研究センター
円筒状の電気炉を用いてZn-Sn系共晶合金の亜共晶融液を作成した。上部より温度制御可能な冷却体を融液に接触させ、冷却体下面に2cmほどの凝固層を生成させた。冷却体下面には5mm間隔で熱電対を設置し、凝固過程中の温度計測を行った。共晶温度の位置が凝固面であると仮定して、凝固速度を算出した。また、各鉛直位置におけるデンドレイトのアーム間隔と凝固速度との間に良好な相関関係が得られた。これにより、温度制御される冷却面を用いて、凝固層の微小組織構造の設計が可能であることを明らかにした。
Molten eutectic alloy metal, based on Zn-Sn mixture, was made in a cylindrical electrically heated furnace. The molten alloy was then cooled from above, with a disc-type temperature-controllable cooling object. The vertical temperature distributions below the cooling surface were monitored during the solidification process. The solidifying speeds were then computed, assuming that the eutectic temperature corresponds to the solidifying boundary. The small specimens taken at different vertical positions were analyzed with microscope. A clear correlation between the dendrite arm intervals and the computed solidifying speeds is observed. This proves that the micro-structure of the solid layer can be controlled by a temperature-controlled cooling surface.
研究課題/領域番号:25420153, 研究期間(年度):2013-04-01 - 2016-03-31
一次資料へのリンクURLhttps://kanazawa-u.repo.nii.ac.jp/?action=repository_action_common_download&item_id=50803&item_no=1&attribute_id=26&file_no=1
関連情報https://kaken.nii.ac.jp/search/?qm=70272953
https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-25420153/
https://kaken.nii.ac.jp/report/KAKENHI-PROJECT-25420153/25420153seika/
連携機関・データベース国立情報学研究所 : 学術機関リポジトリデータベース(IRDB)(機関リポジトリ)