並列タイトル等Application of imaging plate to the radiation protection in the MOX fuel fabrication facility, 2; The effect of changing exposure conditions and analysis conditions
一般注記MOX燃料製造施設の放射線管理において汚染の可視化及びその定量化は、作業環境の汚染管理における汚染状況の迅速な把握に極めて有効である。現在用いているIPの基本的な取扱方法や解析方法、Puの検出及び定量方法は、露光条件や解析条件が一定であることが条件である。しかし、現場で汚染が発生した場合、汚染試料はPuのみの状態ではなく、RnTnやPbが含まれている場合もある。そして、IP操作をしている同室で他作業を行っている場合には、室内を暗くすることが困難なため、IP露光面に光が当たりPSLの減少が起こる。本研究では、MOX燃料製造施設におけるさらなる放射線防護の高度化を図るため、露光条件の変化として、Pu露光時に鉛が混在した場合やIP露光面に光が照射されPSLの減衰が起きた場合について調査した。また、解析条件の変更として、解像度を変更した場合における解析方法について調査した。
Developed in the Mixed Oxide fuel fabrication facility, Basic handling of IP, analysis method, detection of Pu and radioactivity quantification. These are the conditions that the exposure conditions and the analysis condition are constant. However, in the case of Contamination has occurred in the workplace, contaminated samples are not only Pu. It may contain a Pb or RnTn. Then, if other work is being carried out in a room that is the operation of IP, it's difficult to darken the room. PSL is reduced when light hits the IP. In this study, we have investigated in order to upgrade radiation protection, in the case of Containing the Pb or PSL reduction by light. Additionally, regarding change of analysis condition, the analysis method was examined when the resolution was changed to 50 micro, 100 micro and 200 micro.
連携機関・データベース国立情報学研究所 : 学術機関リポジトリデータベース(IRDB)(機関リポジトリ)
提供元機関・データベース日本原子力研究開発機構 : JOPSS:JAEA Originated Papers Searching System