並列タイトル等Development of magnetic probe; Application and result of AT-probes to JT-60U (Joint research)
一般注記臨界プラズマ試験装置(JT-60U)では、電磁気検出器の信号をもとにプラズマ位置・形状のフィードバック制御を行っている。この電磁気検出器は製作コストが高く、次期装置への利用に対してはコストの低減化が求められている。一方、核融合科学研究所では、3軸方向の磁場成分を同時に計測可能で、軽量・コンパクト、かつ安価な電磁気検出器を開発して、大型ヘリカル装置(LHD)の電磁気計測に使用している。今回、日本原子力研究開発機構と核融合科学研究所との共同研究に基づいて、LHDで使用されている電磁気検出器のトカマク装置での適用の可能性を探るため、JT-60U用に本電磁気検出器の取り合い部を製作し、試験的に第一壁直下に設置した。JT-60実験放電を利用して既設の電磁気検出器との比較検討を行った。出力信号の妥当性やディスラプション時における耐振動性,耐放射線性等について調べた。その結果は良好であり、トカマク装置環境下においても十分に使用できる見通しを得た。
The feedback control of the plasma position and shape based on signals of magnetic probes is performed on JT-60. The fabrication cost of these magnetic probes is very high. Therefore, the cost reduction is required for the use in a next device. On the other hand, the magnetic field measurement in three axial directions with the advanced technology (AT) probes is simultaneously made on LHD of NIFS. The AT-probe has been developed at a low fabrication cost and in compact size and light weight. The possibility of application of the AT-probe in a Tokamak device (JT-60U) has been investigated in collaboration between JAEA and NIFS. We designed and fabricated the casing and interface for the AT-probe, and installed it under the first wall of JT-60U. A comparison of output signals between the installed AT-probe and a existing magnetic probe was made. Tests have been carried out to evaluate the vibration resistance and the radioactive resistance through about two thousand shots with high performance plasmas including one hundred disruption shots in JT-60U. As a result, the AT-probe has a good performance and an enough usable prospect in environment of the Tokamak device.
一次資料へのリンクURL/JAEA-Technology-2007-015.pdf (fulltext)
連携機関・データベース国立情報学研究所 : 学術機関リポジトリデータベース(IRDB)(機関リポジトリ)
提供元機関・データベース日本原子力研究開発機構 : JOPSS:JAEA Originated Papers Searching System