並列タイトル等The development of NOx and ozon removal unit in quantum technology development facility; Bench scale test
一般注記現在、核種分離・消滅処理研究(通称:オメガ計画)の一環として、高レベル放射性廃棄物の消滅処理に適用できる大電流電子線形加速器の開発を行っている。このため、加速器付帯設備である、空気処理設備についても、他の加速器要素と同様に大電流化に対応できる技術を確立する必要がある。加速器を運転することで発生する窒素酸化物(NOx)、オゾン(O3)の処理技術の開発・設計のためベンチスケール試験を行った。本報告書では、ベンチスケール試験により得られた結果を報告する。この試験により以下のことが得られた。(1)NOxを除去する為にモル比で1.5倍以上のO3の共存が必要であることがわかった。また、このため加速器の停止後もO3を系内に残存させる必要があることがわかった。(2)加速器室で生成したNOxは、硝酸の形で加速器構成部材、加速器室壁面に吸着し、運転停止後の加速器室の濃度低下に伴い再度気相側に離脱すると推定された。
JNC is investingating the best way to treat high-level radioactive nuclear waste from reactors. For basic research into the transmutation of fission products, JNC developed a high-power CW electron linac. Therefore, on air treatment system which is one of the incidental systems for accelerator, it is also necessary to establish the technology which can deal with the current enlargement as well as other accelerator element. The bench-scale of air treatment system test was carried out for development and design of removal technology nitrogen oxides and ozone which create by driving the accelerator. In this report, the result obtained by bench-scale test is reported. Following fact was obtained by this test. (1)For the removal of NOx, coexistence of O$_{3}$ over l.5 times of NOx is necessary at the mole ratio. So, it must be made to remain O$_{3}$ after the shutdown of the accelerator in the inside system. (2)The NOx which is created in the accelerator room is adsorbed in the form of the nitric acid in constructional element and accelerator room wall surface. It seems to leave it with the lowering of concentration after the shutdown in the again vapor phase side again.
一次資料へのリンクURL/JNC-TN9430-99-003.pdf (fulltext)
連携機関・データベース国立情報学研究所 : 学術機関リポジトリデータベース(IRDB)(機関リポジトリ)
提供元機関・データベース日本原子力研究開発機構 : JOPSS:JAEA Originated Papers Searching System