並列タイトル等Development of off-line load sensor; Characterization of sintered-metal load gauge element (2)
一般注記オフ・ライン荷重センサーの開発に関して、「焼結体による荷重測定素子の特性測定(その1)(PNC SN9410 90-082)」で得られた基礎的特性データに基づき、原子炉環境下における実用化の観点から特性測定(II)及び(III)として以下の試験及び検討を行った。(1)特性測定(II)1)初期条件調整圧縮試験2)形状パラメータ圧縮試験3)斜角圧縮試験4)圧縮クリープ試験(2)特性測定(III)1)初期条件調整圧縮試験2)高温平行圧縮試験3)高温斜角圧縮試験特性測定(II)により、測定素子は530$^{\circ}C$程度以下の原子炉環境下においてオフ・ライン荷重センサーとして実用に供しうるとの見通しが得られた。さらに特性測定(III)では、ルースパーツ対策としてカバーを接合した測定素子の特性データ取得し、実用の可能性を確認した。一連の特性測定試験と並行して、原子炉内における荷重測定素子としての実用化検討と汎用生の検討も加えた。本報告書では、特性測定(II)及び(III)の期間に得られた成果を第1編、第2編で報告するとともに、第3編に実用化に関する検討結果を報告する。
Subsequent to the previuos testing (PNC SN9410 90-082, June 1990), characterization has been made on the sintered-metal load gauge element. The sintered-metal load gauge element was developed for use in off-line load measurement in the reactor environment. The testing conducted is as follows : (1)Characterization test phase II (a)Compression Tests for Initial Adjustment (b)Geometrical Parameter Compression Tests (c)Inclined Compression Tests (d)Creep Tests at Elevated Temperature (2)Characterization test phase III (For application in the reactor environment, the sintered-metal was covered with thin plates.) (a)Compression Tests for Initial Adjustment (b)Compression Tests at Elevated Temperatures (c)Inclined Compression Tests at Elevated Temperatures The results have shown that the sintered-metal load gauge element is applicable in the reactor environment. In association with the characterization tests, method for practical applications in JOYO and extended application have also been investigated.
一次資料へのリンクURL/PNC-TN9410-94-351.pdf (fulltext)
連携機関・データベース国立情報学研究所 : 学術機関リポジトリデータベース(IRDB)(機関リポジトリ)
提供元機関・データベース日本原子力研究開発機構 : JOPSS:JAEA Originated Papers Searching System