並列タイトル等JASPAS JC-7;Automated gravimetric sample preparation system (AGSS) for safeguards analysis
一般注記This report describes the results of the performance test of the automated gravimetric sample preparation system for plutonium product safeguards. Recent accountability and safeguards analysis require more accurate sample preparation and measurement. With respect to the accountability measurement, the advanced techniques such as the controlled potential coulometry have been developed so far. As for sample preparation, several sampling devices on the volumetric sample preparation have been also developed. It has been, however, still required that sample preparation be performed on the gravimetric base in order to achieve more accurate accountability. It is expected that the errors due to the difference between the temperature on vessel volume measurement and that on quantitative analysis of sample can be eliminated with the gravimetric method, An automated gravimetric sample preparation system for the purpose of plutonium safeguards sample preparation has been developed at the Tokai reprocessing plant. This system is capable of taking aliquots and diluting samples automatically with a robot hand. The summary results of the performance test are as follows, (1)the error estimated based on the preparation scheme is around 0.02\%, which is due to the error based on the solution evaporation observed throughout the sample preparation. (2)the time required for the safeguards sample preparation consisting of national and international inspections is within 70 minutes. It is concluded that the system can be satisfactorily used for the routine safeguards sample preparation. This development has been made under Japan Support Program for Agency Safeguards (JASPAS).
再処理工場の核物質の計量管理は,核物質の保障措置上重要である。再処理工場では,核物質の入量及び出量計量に係るベッセルの容量測定,試料のサンプリング,希釈調製及び分析により核物質量の計量を実施してきた。計量管理における誤差は,これら各操作に存在する誤差の総和であるが,これらの誤差をさらに小さくするよう,近年IAEAから要求されていた。そのため,対IAEA保障措置技術開発支援計画(JASPAS)の一環として,特に試料調製以降の操作を対象に本題を計画し,実施した。なお,今回は出量計量(プルトニウム製品濃縮受槽)の自動重量サンプリング装置の開発を実施した。再処理工場の出量計量に係るサンプリング,希釈調製操作は,これまでピペットやメスフラスコ等を使用する容量法で実施してきた。この方法による誤差は,グローブボックス内の特殊環境で操作するため,温度補正等を行っても,なお全体誤差に占める割合が大きいものとなっていた。そのため,温度補正等環境条件に存在しない重量法に取組み,遠隔操作性を重点に自動化装置を開発した。主な成果は次のとおりである。(1) 遠隔操作用ロボットアームの小型化を図り,既在のグローブボックス内への設置を可能とした。(2) 自動化の動作シーケンスのケーススタディを行ない,最適なシーケンスを確立し,全自動の重量サンプリング装置として完成できた。(3) 本重量サンプリング装置によるサンプリング,希釈調製,2次サンプリングの総合誤差は0.1\%以下であり,良好な性能を示すことを確認した。(4) これまで多大な労力を要していた保障措置試料の調製作業について大巾に省力化を図ることができた。
一次資料へのリンクURL/PNC-TN8410-89-062.pdf (fulltext)
連携機関・データベース国立情報学研究所 : 学術機関リポジトリデータベース(IRDB)(機関リポジトリ)
提供元機関・データベース日本原子力研究開発機構 : JOPSS:JAEA Originated Papers Searching System