著者・編者液体アポジエンジン研究開発チーム
Rocket Propulsion Research Division
並列タイトル等Development test of a liquid apogee engine for the ETS-6
タイトル(掲載誌)航空宇宙技術研究所報告 = Technical Report of National Aerospace Laboratory
一般注記1994年度にH-2ロケットで打ち上げが予定されている2000kg級大型技術試験衛星ETS-6のアポジエンジン(衛星をトランスファ軌道からドリフト軌道に軌道変換させる)には貯蔵性推進薬を用いた2液式液体アポジエンジンが用いられる。このエンジンには高性能、高信頼性が要求され、比推力325秒を目標として開発研究を行った。現在実用化されている液体アポジエンジンの比推力が310秒であることから、実現すれば世界でもトップクラスの性能を有するエンジンとなる。この目標達成のために我々は、(1)推進薬として酸化剤に4酸化2窒素、燃料には高エネルギであるヒドラジンを用いる。(2)高膨張ノズル(開口比200-300)の採用。(3)システムの単純化による信頼性の向上を図るためブローダウン方式を採用することとした。1983年から基礎実験を開始し、ハードスタート、ポップ、熱制御など種々の課題を乗り越え、1990年度に本エンジンが完成した。エンジンの最終仕様は以下の通りとなった。エンジン作動範囲;燃焼圧0.97-0.63(MPa),混合比0.85-1.05,推力;1980-1280(N),ブローダウン平均比推力;320.0±2.7(秒),連続燃焼可能時間;2900(秒)である。比推力は当初目標に達しなかったがそれでも世界トップクラスの性能を持ったエンジンである。本報告書では主に、インジェクタの開発を中心に述べる。
A pressure-fed, full-blowdown, Nitrogen Tetroxide (NTO)/hydrazine (N2H4) bipropellant liquid apogee propulsion system was selected for Engineering Test Satellite-6 (ETS-6), a 2000-kg Japanese engineering test satellite. This 2000-kg mass geostationary satellite is scheduled to be launched by an H-2 rocket in 1994. The apogee engine required a high reliability and a relatively high performance for a pressure fed system. In the preliminary development phase of the apogee engine, a peak vacuum specific impulse Ispv of 325 s was set as the initial development target. This performance requirement of the apogee engine is greater than that of the bipropellant engine using NTO/Monomethyl Hydrazine (MMH). To meet such high performance requirements, a NTO/N2H4 propellant system instead of NTO/MMH propellant was employed and a very large area ratio nozzle (nozzle area ratio is 200 to 300) was used. To enhance the reliability of the apogee propulsion system, a pressure-fed, full-blowdown system was selected. Fundamental studies including hard-start, pop and thermal problems were also conducted during the development series of apogee engine started in 1983. Performance characteristics of apogee engine developed in 1990 was as follows; chamber pressure Pc = 0.97-0.63 MPa, mixture ratio MR = 0.85-1.05, vacuum thrust = 1980-1280 N, mean vacuum specific impulse Ispv = 320.0 +/- 2.7 s, and total burn time = 2900 s. Delivered peak Ispv was less than the initial development target, however, the engine performance was higher than that of the engine for NTO/MMH propellant. This paper describes mainly the development studies of the injectors used in the apogee engine.
資料番号: AA0004257000
レポート番号: NAL TR-1250
一次資料へのリンクURLhttps://jaxa.repo.nii.ac.jp/?action=repository_action_common_download&item_id=41226&item_no=1&attribute_id=31&file_no=1
連携機関・データベース国立情報学研究所 : 学術機関リポジトリデータベース(IRDB)(機関リポジトリ)
提供元機関・データベース宇宙航空研究開発機構 : 宇宙航空研究開発機構リポジトリ