書店で探す
全国の図書館の所蔵
国立国会図書館以外の全国の図書館の所蔵状況を表示します。
所蔵のある図書館から取寄せることが可能かなど、資料の利用方法は、ご自身が利用されるお近くの図書館へご相談ください
その他
宇宙航空研究開発機構リポジトリ
デジタル連携先のサイトで、学術機関リポジトリデータベース（IRDB）（機関リポジトリ）が連携している機関・データベースの所蔵状況を確認できます。宇宙航空研究開発機構リポジトリのサイトで この本を確認
書店で探す
書誌情報
この資料の詳細や典拠（同じ主題の資料を指すキーワード、著者名）等を確認できます。
- 資料種別
- 規格・テクニカルリポート類
- 著者・編者
- 藤沢, 良昭池田, 為治祖父江, 靖宮地, 敏雄小河, 昭紀FUJISAWA, YoshiakiIKEDA, TameharuSOFUE, YasushiMIYACHI, ToshioOGAWA, Akinori
- 著者標目
- 出版事項
- 出版年月日等
- 1979-09
- 出版年（W3CDTF）
- 1979-09
- 並列タイトル等
- Experimental Study on Strength Characteristics of Diffusion Bonded Hollow Fan Blades
- タイトル（掲載誌）
- 航空宇宙技術研究所報告 = Technical Report of National Aerospace Laboratory TR-585
- 巻号年月日等（掲載誌）
- 585
- 掲載巻
- 585
- 掲載ページ
- 19-
- ISSN（掲載誌）
- ISSN : 0389-4010
- 本文の言語コード
- jpn
- 対象利用者
- 一般
- 一般注記
- 出版タイプ： NAModels of hollow blades were made and tested to prove the applicability of hollow blades as fan rotor blades for the turbo-fan engine. The hollow blade models were fabricated by the diffusion bonding of two plates which were made of a titanium alloy. One of the plates had three spanwise stiffeners and the other was a constant thickness plate. By this method, the models were completed to a satisfactory accuracy of shape and size. No defect could be found in the diffusion bonded areas by an ultrasonic detector. The models had uniform cross sections of 80mm chord length, 4mm maximum thickness and 1mm skin thickness. The hollowness rate of the cross section was about 27％. The length of the model was 300mm. Tests on the bending stiffness, the torsional stiffness and the bending fatigue properties of the model were carried out and the following results were obtained. 1)The bending stiffness and torsional stiffness of the hollow blade model were reduced to about 90％ of the value of the solid blade model. Experimental results of the bending and torsional stiffness properties compare closely to the theoretically predicted results. 2)The mode of fatigue failure of the models which were tested with cyclic bending was, without exception, a chordwise crack which originated from the outer surface of the model. The relation between the cyclic maximum bending stress and life of the model was nealy the same as the σ-N relation of the model material. No separation could be detected in the bonded areas after the test. According to the above-mentioned results, it can be said that properly designed hollow blades of this type will have satisfactory stiffness and strength as fan rotor blade for the turbo-fan engine and will be effective for reducing the weight of the engine.資料番号: NALTR0585000レポート番号: NAL TR-585
- 連携機関・データベース
- 国立情報学研究所 : 学術機関リポジトリデータベース（IRDB）（機関リポジトリ）
- 提供元機関・データベース
- 宇宙航空研究開発機構 : 宇宙航空研究開発機構リポジトリ