並列タイトル等Diagnostic Experiments in an Arc-Heated Channel Nozzle Flow
タイトル(掲載誌)独立行政法人航空宇宙技術研究所報告 = Technical Report of National Aerospace Laboratory TR-1443
一般注記NAL/NASDA共同研究で運用されている750kWアーク加熱風洞において,平板材料供試体試験用チャンネルノズル内部気流の診断実験を行った。従来の材料試験の条件設定は,測定部での熱流束,圧力の計測のみに依存していたが,観測窓を備えた新しい校正用モジュールの製作により,上記項目に加えて,内部気流の分光スペクトル,気流成分の質量分析,供試材料の表面温度,加熱試験中の表面状態の観測等が可能となった。また,ガードンゲージを交換式で装着可能とし,固定式ゲージとの併用により,高エンタルピ境界層流れ中でのゲージの計測精度評価を行った。これらの計測系の概要と計測結果について述べる。
The 750kW arc-heated (or arc-jet) wind tunnel is equipped with a channel nozzle to evaluate flat plate TPS materials. TPS material tests for HOPE-X design data have been made with this channel nozzle, but the flow characteristics of the high enthalpy flow generated in the nozzle have not been well investigated. Therefore, flow diagnostic experiments have been planned. Experimental items included in the plan are emission spectroscopy, mass spectrometry, heat flux measurements, and thermometry and direct surface observations of the test materials. A new calibration module was designed to install the instrumentation necessary for the measurement of these items in the channel nozzle test section. The conception of the experiments, design details of the module and main experimental results are presented.
資料番号: NALTR1446000
レポート番号: NAL TR-1446
一次資料へのリンクURLhttps://jaxa.repo.nii.ac.jp/?action=repository_action_common_download&item_id=45429&item_no=1&attribute_id=31&file_no=1
連携機関・データベース国立情報学研究所 : 学術機関リポジトリデータベース(IRDB)(機関リポジトリ)
提供元機関・データベース宇宙航空研究開発機構 : 宇宙航空研究開発機構リポジトリ