電圧印加時におけるADN系イオン液体の可視化および温度・電流同時測定

• 資料種別: 規格・テクニカルリポート類
• タイトル: 電圧印加時におけるADN系イオン液体の可視化および温度・電流同時測定
• 著者・編者: 久保田, 悠斗; 大森, 稜介; 伊東山, 登; 塩田, 謙人; 伊里, 友一朗; 三宅, 淳巳; KUBOTA, Yuto; OMORI, Ryosuke; ITOUYAMA, Noboru; SHIOTA, Kento; IZATO, Yuichiro; MIYAKE, Atsumi
• 著者標目: 久保田, 悠斗; 大森, 稜介; 伊東山, 登; 塩田, 謙人; 伊里, 友一朗; 三宅, 淳巳; KUBOTA, Yuto; OMORI, Ryosuke; ITOUYAMA, Noboru; SHIOTA, Kento; IZATO, Yuichiro; MIYAKE, Atsumi
• 出版事項: 宇宙航空研究開発機構(JAXA)
• 出版年月日等: 2023-02-03
• 出版年（W3CDTF）: 2023-02-03
• 並列タイトル等: Measurement of In-situ Image, Temperature, and Current of ADN-based Ionic Liquids Voltage-applied
• タイトル（掲載誌）: 宇宙航空研究開発機構研究開発報告: 高エネルギー物質研究会: 令和4年度研究成果報告書 = JAXA Research and Development Report: Technical Report of The Research Activity for High Energy Materials (2022)
• 巻号年月日等（掲載誌）: JAXA-RR-22-006
• 掲載巻: JAXA-RR-22-006
• 掲載ページ: 11-14
• ISSN（掲載誌）: ISSN : 2433-2216
• 本文の言語コード: jpn
• 件名標目: High energetic materials; Ammonium dinitramide; Ignition
• 対象利用者: 一般
• 一般注記: 出版タイプ： VoR; Ammonium dinitramide (ADN) based energetic ionic liquids (EILs) has been expected as a next HEMs. Since ADN-based EILs are thermally stable, it is difficult to control ignition phenomena using thermal ignition methods. Our research group focused on an ignition method of the EILs by applying a voltage. Previous Studies have theoretically reported the possibility of ignition of ADN-based EILs and experimentally demonstrated the ignition. However, appropriate operational conditions have not been established due to a lack of understanding of the ignition process and phenomena. Therefore, the objective of this study was understanding the ignition process and phenomena based on the results of voltage applied experiments (image, temperature and current measurement). In this experiment, a voltage was applied to a droplet of ADN-based EILs, and the behavior of droplet was filmed by a high-speed camera, while temperature and current measurements were made simultaneously. The voltageapplication process is divided into four phases based on current behavior. It was revealed that the amount of power required for the transition from Phase 1 to Phase 3 remained constant under different experimental conditions. Established a method for measuring ignition delay time. Furthermore, it became clear that the ignition delay time could be reduced by lowering the resistivity of the sample.; 形態: カラー図版あり; Physical characteristics: Original contains color illustrations; 資料番号: AA2230017003; レポート番号: JAXA-RR-22-006
• DOI: 10.20637/00049035; https://doi.org/10.20637/00049035
• 連携機関・データベース: 国立情報学研究所 : 学術機関リポジトリデータベース（IRDB）（機関リポジトリ）; https://irdb.nii.ac.jp
• 提供元機関・データベース: 宇宙航空研究開発機構 : 宇宙航空研究開発機構リポジトリ