Transactions of the Japan Welding Society
- 国立国会図書館永続的識別子
- info:ndljp/pid/10387702
巻号一覧
全48件
インターネットで読める国立国会図書館
目次COVER CONTENTS ANNOUNCEMENT CONTENTS Profile of the Japan Welding Society Study on Glass-Metal Bonding by Anodic Bonding Study on Penetration Form Using Stationary TIG Arc : Study on Low Speed DC-TIG Welding Method Influence of Gas-Tungsten-Arc Electrode Material on AC TIG Arc Welding Current Distribution on Molten Pool in Stationary GTA Welding of Ti Alloy High Temperature Brazing for Stainless Steel SUS316L with Pd-Cu Brazing Filler Metals Development of Pd-Ni Brazing Filler Metals for SUS316L Stainless Steel Effect of Beam-Plasma Interaction on Characteristics of Drilling : Study on Material Processing by High Peak, Short Pulse CO_2 laser Optimization of Friction Welding Condition for S45C Carbon Steel Using a Statistical Technique An Experimental Study on Sensitvity and Signal Characteristics of Welds Pool Oscillation Effects of Material Properties on Transient Response in GTA Welding A Study About Atomic Interaction at the Interface of Transient-Metal/Ceramics Abrasive Wear Resistance of Overlay Composite Alloy with Addition of Carbide Powders Combined Influence of Chromium, Molybdenum and Vanadium on Reheat Cracking of Steel : Study of Reheat Cracking of Cr-Mo Steels, (Report 9) Influence of Vanadium Carbide on Reheat Cracking of Cr-Mo Steels : Study of Reheat Cracking of Cr-Mo Steels (Report 10) Fractogrphy on Microcracks in Ni-base Multipass Weld Metals : Study on Microcracks in Multipass Weld Metals of Ni-base Alloys (Part 1) Effects of Cr and S on Ductility-dip Cracking Susceptibilities in the Reheated Weld Metals of Ni-Cr-Fe Ternary Alloys : Study on Microcracks in Multipass Weld Metals of Ni-base Alloys (Part 2) Effect of TiC-Cr_3C_2 Particles Content on Abrasive Resistance of Co-Base Overlay Weld Alloy Effect of Particle Size on Explosive Compaction of Co-Based Alloy Powder Proportion of Transformation Superplasticity and Expansion on Stress Releasement Fatigue Properties of Fillet Welded Joints in Piping System The Behavior of Temperature Decreasing and Fraction Solid Increasing in Solid-Liquid Coexisting Zone in Solidification Process of Aluminum Alloy Weld Metal Investigation on Solidification Process Fracture Surface Observation of Aluminum Alloy Welds Specimen Broken by High Speed Breaking Test 奥付 BACKCOVER
インターネットで読める国立国会図書館
目次COVER CONTENTS CONTENTS Profile of the Japan Welding Society On the Fatigue Life of the Single Spot-Welded Joint under the 2-Steps Repeating Loads : Comparison of Results for Mild Steel and Those for High Strength Steel Heat and Mass Transfer and Their Effect on Penetration Shape in Stationary TIG Arc Weld Pool Melting Process and Spiking Phenomenon in Electron Beam Welding Development of a Multi-pass Welding Program for Arc Welding Robots and Its Application to Heavy Electrical Section Pieces Liquid Phase Diffusion Welding of Nickel-Base Superalloy Using Ni-B System Alloyed Layer Formed on Bonding Surface with Sputtering Algorithm of Dual Lines Scanning Method and Accuracy Improvement by Employing Rectangular Pixel : Perimeter Measurement by Dual Lines Scanning Method (First Report) Implementation in Hardware and Its Evaluation of Dual Lines Scanning Method : Perimeter Measurement by Dual Lines Scanning Method (Second Report) Friction Welding of Copper-Tungsten Sintered Alloy to Pure Aluminum : Formation of Intermetallic Compound at Weld (Report 1) Effects of Laser Surface Melting on Corrosion Resistance in Weld Metals of Mo Containing Austentic Dtainless Steels Formation of Diffusion Layer and Bond Strength of Diffusion Bonds of Aluminum Bronze to Stainless Steel Influence of Residual Stress on Fatigue Strength of Non-Load-Carrying Fillet Welded Joints Auger Analysis on Atomic Interaction Across Metal-Ceramic Interface 奥付 BACKCOVER
インターネットで読める国立国会図書館
目次COVER Contents CONTENTS Profile of the Japan Welding Society Study on Critical CTOD Property in Heat Affected Zone of C-Mn Microalloyed Steel Relationship between Grain Boundary Structure and Intergranular Corrosion in Heat-Affected Zone of Type 304 Stainless Steel Weldments New Development of Transient Liquid Insert Metal Diffusion Bonding Using Alloying Powder Analysis of Homogenizing Process of Alloying Elements on Transient Liquid Insert Metal Diffusion Bonding Weldability of 12%Cr-15%Mn Austenitic Stainless Steel Relation between Process Parameters and Cut Quality in Laser Cutting of Aluminum Alloys Development of Vacuum Roll Bonding Apparatus and Production of Clad Metals : Development of Clad Metals by Vacuum Roll Bonding and its Characteristics (Report 1) Impact Property at Cryogenic Temperature of Candidate Materials for Fusion Reactor and Their Electron Beam Welded Joint Relation Between Fatigue Strength and Reinforcement Shape of Simulated Butt-Welded Joint Influence of Residual Stress on Fatigue Strength of Non-load-carrying Fillet Weld Joints Mechanical Study on Quasi-Solidification Cracks under Pulsating Loads : Welding on Structures in Service Condition (Report II) Analysis of Laser Transformation Hardening Process of Hypoeutectoid Steel : 1st Report, Formulation and Computer Model for Coupled Analysis between Temperature Field and Structural Changes Analysis of Homogenizing Process of Alloying Elements on Transient Liquid Insert Metal Diffusion Bonding : Study on Transient Liquid Insert Metal Diffusion Bonding of Ni-base Superalloys, (Part 4) Analysis to Reduction of Mechanical Properties in Transient Liquid Insert Metal Diffusion Bonding Joint : Study on Transient Liquid Insert Metal Diffusion Bonding of Ni-base Superalloys (Part 5) Friction Welding of Shape Memory Alloy Blast Erosion Properties of Sintered Ceramics and Sprayed Coatings Development of Multi pass Welding Program for Arc Welding Robots and It's Application to Heavy Electrical Sections Nurnerical Analysis on Microsegregation during Weld Solidification : Weld Crack Susceptibility of Duplex Stainless Steel (Report IV) Numerical Analysis on Solidification Brittleness Temperature Range in Stainless Steel : Weld Crack Susceptibility of Duplex Stainless Steel (Report V) Effects of Nitrogen and Molybdenum on Weld Solidification Crack Susceptibility : Weld Crack Susceptibility of Duplex Stainless Steel (Report VI) Effect of Rapid Solidification on the Microstructures and Delta-ferrite Morphologies : Study on Surface Modification of Stainless Steels by Laser Surface Melting (Report 4) Effect of Rapid Solidification on the Delta-ferrite Content in Microstructure and Its Implications on the Schaeffler diagram : Study on Surface Modification of Stainless Steels by Laser Surface Melting (Report 5) Effect of Rapid Solidification on Corrosion Resistance of Stainless Steels : Study on Surface Modification of Stainless Steels by Laser Surface Melting (Report 6) Effect of Rapid Solidification on Pitting Corrosion Resistance in Weld Metals of Mo Containing Stainless Steels : Study on Surface Modification of Stainless Steels by Laser Surface Melting (Report 7) Effect of Weld Cooling Rate and Impure Gas on the Microstructure of Ti-6Al-4V Alloy Weldment : Study on Welding of Titanium Alloys (Report 1) Solidification Cracking in the Wel Metal of Titanium Alloys : Study on Welding of Titanium Alloys (Report 2) An Investigation on the Weld Solidification of Cr-Ni-Fe-Mo Alloys Proposal on Hardenability in Heat-Affected Zone of Medium, High Carbon Machine Structural Steels Weldability of 6% Superaustenitic Stainless Steel for Seawater Applications Effect of Alloying Elements and Transformation Temperature on Stress Releasement : Stress Releasement by Transformation Superplasticity (Part 2) Adhesive Strength Evaluation of Plasma Sprayed Coatings by Tesile Pin Test : Applicability of Stress Singularity Parameter for Evaluating Adhesive Strength of Coating Film (Phase 1) Selection for Parameter of Cooling Time for Estimation of Hardenability in Welding of Medium, High Carbon Stecls Submerged Arc Welding in the Ar-N_2 Mixture Gas Atmosphere : Various Gas Atmosphere Report 3 Current Distribution on Molten Pool in Stationary TIG Arc Welds of Ti Alloy : Study on Behaviour of Anode on Molten Pool in TIG Arc Welds (1st Report) Metallic Joining Technique of Insulated Copper Coil Perimeter Measurement by Dual Lines Scanning Method : Implementation in Hardware and Its Evaluation of Dual Lines Scanning Method Mechanical Propertics of Mild Steel Weld Metals Produced in Pressurized Ar-CO_2 Atmospheres Contraction Process and RRC Test of Nodular Graphite Cast Iron Weldments : Studies on the Weld Cracking of Nodular Graphite Cast Iron (Report 5) Effect of Electrode Potential and Structure on the Susceptibility to HESCC in Duplex Stainless Steels Analytical Evaluation of Hydrogen Embrittlement Type SCC and Its Mechanism in Duplex Stainless Steel Welds Effect of Ambient Temperature on Steel Weldability Effect of Grain Boundary Structure on Weld Decay of Austenitic Stainless Steel (Part 1) : Crain Boundary Structure and Intergranular Corrosion in a Type 304 Stainless Steel Weld Heat Affected Zone Effect of Grain Boundary Structure on Weld Decay of Austenitic Stainless Steel (Part 2) : Grain Boundary Structure and Carbide Precipitation in Type 304 Stainless Steel Weld Heat Affected Zone HAZ Toughness of High Silicon Containing Duplex Stainless Steel : Study on Welding of High Silicon Containing Stainless Steels (II) Adhesive Strength Evaluation of Coating Layer by Modified Pin Test : Applicability of Stress Singularity Parameter for Evaluating Adhesive Strength of Coating Film (Phase 2) Study of g value of Edge Crack Existing along Bond Line of Joint Composed of Dissimilar Materials : Study of Specimen Size for Estimating Joint Strength of Dissimilar Materials (Part 2) Root Failure Resulting from Toe Treatment of Non-Load-Carrying Cruciform Fillet Welded Joints A Judging Method of Advisability of Welding under Pulsating Loads : Welding on Structures in Service condition (Report III) Nondestructive Evaluation of Residual Weld Stress and Mechanical Stress Relieving by Acoustoelasticity Microstructure and Hardening Mechanism of Nitrided Ni Binary Alloys : Studies on Surface Modification of Nonferrous Metals by means of Plasma Ion Nitriding (PIN) Process (Report 4) Effect of the Third Alloying Elements on Surface Hardening of Ni-7wt%Ti and Ni-20wt%Cr Binary Alloys by PIN Process : Studies on Surface Modification of Nonferrous Metals by means of Plasma Ion Nitriding (PIN) Process (Report 5) Prediction of Welding Residual Stresses in T-and I-Joints Using Inherent Strains : A predicting method of welding residual stress using source of residual stress (Report 3) Effect of Molten Metal Behavior on Melting Process in Electron Beam Welding : A Study on Electron Beam Welding Phenomena (Report 4) Wettability and Interaction of Silver-base Brazing Alloy Melts to Spheroidal Graphite Cast Iron Investigation of TIG Welding in Pressurized Helium Atmosphere Study on Liquid Phase Diffusion Welding of Nickel Base Superalloy Used Ni-B System Alloyed Layer Formed on Bonding Surface with Sputtering Brazing of Commercial Pure Titanium with Zr-based Filler Metal A Study of the Susceptilility for HESCC and It's Evaluation in Duplex Stainless Steel Weldaments : Analytical Evaluation of Hydrocen Embrittlemanl Type SCC and It's Mechanism in Duplexs Stainless Steel Weldments A Study of Criterion of HESCC Initiation and Prediction of Life Time in Duplex Stainless Steel : Analytical Evaluation of Hydrogen Embrittlement Type SCC and It's Mechanism in Duplex Stainles Weldmant A Study of Mechanism of HESCC in Duplex Stainless Steel and It's Welds : Analytical Evaluation of Hydrogen Embrittlement Type SCC and It's Mechanism in Duplex Stainless Steel weldment Influence of Microstructure in the Heat-Affected Zone on the Reheat Cracking Susceptibility of Cr-Mo steel Oxygen Absorption of Arc-Melted Pure Iron : Study on Oxygen Absorption and Deoxidation of Steel Weld Metal (Part 1) Oxygen Absorption and Deoxidation of Arc-Melted Fe-Si Alloy : Study on Oxygen Absorption and Deoxidation of Steel Weld Metal (Part 2) Influence of Delta-ferrite on Sensitization of the Austenitic Stainless Steel Weld Metal Effect of Plastic Deformation on Fatigue Crack Closure Behavior in Low Yield Strength Material and Its Welded Joint Study of Residual Stress in the Vicinity of Interface Corner of Sprayed Coatings Estimation of the Cooling Time t_<8/5> and Thermal Factorof Weldments with Local Preheating Effect of Continuous Postheating Time on Reduction of Preheating Temperature Predicting Heating and Cooling Times due to Local Preheating Construction of 3-dimensional Image by Using A Characteristics of Secondary Electron Intensity with SEM and It's Application Spot Welding of Iron-based and Cobalt-based Amorphous Alloy Foils (Report 2) Friction Welding of Oxygen Free Copper to Pure Aluminum Friction Welding of Copper-Tungsten Sintered Alloy to Pure Aluminum : Formation of Intermetallic Compound at Weld (Report 1) Friction Welding Of Copper-Tungsten Sintered Alloy to Pure Titanium : Formation of Intermetallic Compound at Weld (Report 2) Plasma Spraying of Metal-Ceramic Composite Powders Produced by MA Method Bonding Mechanism and Microstructure of Bonded Zone of AIN Ceramics with Ti-AgCu Brazing Metal Metal Flow in Molten Pool by Defocused Electron Beam : Minor element effect on weld penetration (2nd report) A Study on Object Modeling of Plate Stucture by Parts Representation and Its Local Relations Oxygen and Nitrogen contents of Multilayer Weld Metal by Submerged Arc Welding Wetting and Reaction Products Formed at the Interface Between SiC and Cu-Ti Alloys The Effects of δ-Ferrite Morphology on Low Temperature Fracture Toughness of Austenitic Stainless Steel Weld Metal Grain Boundary Structure and Carbide Precipitation in a Type 304 Stainless Steel at High Temperatures : Effect of Grain Boundary Structure on Weld Decay of Austenitic Stainless Steel (Part 3) Applicaion of Auger Analysis to Titanium/Silica Interface : Transition of chemical bonding through metal/ceramic interface (I) Auger Analysis of the Interface between 3d-Metals and Silica : Transition of chemical bonding throurh metal/ceramic interface (II) Newly Development in Transient Liquid Insert Metal Diffusion Bonding Using Alloying Powder : Study on Transient Liquid Insert Metal Diffusion Bonding of Ni-base Superalloys (Part 6) Bonding Mechanism in Transient Liquid Insert Metal Diffusion Bonding Using Alloying Powder : Study on Transient Liquid Insert Metal Diffusion Bonding of Ni-base Superalloys (Part 7) Proposal of Implant Type Torsion Test for Estimating Adhesive Strength of Sprayed Coatings Repeated Thermal Shock Properties of Functionally Gradient Plasma Sprayed Coatings under the Temperature Gradient Condition Investigations on Usability of Undermatched Joint in a Superconducting Coil Case for Fusion Reactor Joining of Titanium-Matrix Composites Reinforced with SiC-CVD Fiber A Study on Mechanical Properties of the Grain Growth Region in Gold wire Ball Bonding 奥付 BACKCOVER
インターネットで読める国立国会図書館
目次COVER Contents CONTENTS Profile of the Japan Welding Society Prototype Instrument for PAS and Examples of PA Characteristics of Solid Specimens : Study of Non-Destructive Testing Method for Thermally-Sprayed Specimens by Photo-Acoustic Spectroscopy (Report 1) Behavior of Bonded Interface of Explosive Clad Steel Sensing and Digital Control of Weld Pool in Pulsed MIG Welding Root Failure Resulting from Fillet Toe Dressing Development of an Automatic Beam Focal Detection System for Electron Beam Welding Effects of Ni and N on Mechanical and Corrosion Properties in High Cr and Mo Duplex Stainless Steel Weldment Single-Shot Explosive Welding of Hard-to-Weld JIS A5083/SUS304 Clad Using SUS304 Intermediate Plate Vibration Damping Characteristics and Mechanical Properties of Composite Sheets Consisting of Rolled Spheroidal Graphite Cast Irons and Mild Steels 奥付 BACKCOVER
インターネットで読める国立国会図書館
目次COVER CONTENTS CONTENTS Members of the Editorial Committee of Transactions of the Japan Welding Society Profile of the Japan Welding Society Estimation of Radial Heat Flux Distribution in Plasma Arc Cutting with a Least Squares-collocation Method on the Boundary Measurement of Temperature and Velocity of Thermally Sprayed Particles using Thermal Radiation Effects of Porosities on Welded Joint Strength of Spheroidal Graphite Cast Iron Welds Using Insert Metals : Study on Electron Beam Welding of Spheroidal Graphite Cast Iron (Report 3) Characterization of Microstructures and Precipitated Carbides in HAZ which Affect the Reheat Cracking Susceptibility of High Tensile Steel Welds Functional Characteristics of Friction Welded Near-Equiatomic TiNi Shape Memory Alloy Abstracts of the Papers Presented in the Quarterly Journal of the J.W.S. 奥付 BACKCOVER
インターネットで読める国立国会図書館
目次COVER CONTENTS CONTENTS Members of the Editorial Committee of Transactions of the Japan Welding Society Profile of the Japan Welding Society Temperature and Work Function Measurements with Different GTA Electrodes Cracking by Elevated Temperature Embrittlement in the HAZ of Alloy 800H Analysis of Residual Stresses in Evaporated and Plating Films The Effect of Pressure on Mechanical Properties of Welded Joints : On Gravity Arc Welding under High Pressure Atmosphere Effect of Alloying Elements on Hot Cracking Susceptibility of Fe-Cr-Mn Alloys Formation Mechanism of Weld Defects of Spheroidal Graphite Cast Iron Welds : Study on Electron Beam Welding of Spheroidal Graphite Cast Iron (Report 1) Effects of Insert Metal on Some Properties of Spheroidal Graphite Cast Iron Welds : Study on Electron Beam Welding of Spheroidal Graphite Cast Iron (Report 2) On Three-Dimensional Elastic-Plastic Stress Analysis of Spot-Welded Joint under Tensile Shear Load Cooling Time and Predicitive Equation for Estimating Hydrogen Diffusion in CTS Test Welds Diffusion Bonding of Aluminum Bronze to Stainless Steel and Improvement of the Weldability Preheating Effect on the Critical Rupture Stress of Nodular Graphite Cast Iron Welds : Study on the Weld Cracking of Nodular Graphite Cast Iron (Report 2) 奥付 BACKCOVER
インターネットで読める国立国会図書館
目次COVER CONTENTS CONTENTS Members of the Editorial Committee of Transactions of the Japan Welding Society Profile of the Japan Welding Society Roles and Behaviors of Rare Earth Metal Oxides During the Operation of Tungsten Doped Electrodes Influence of Bath Constituent on Microstructure and Joining Characteristics of Plating Layer at the Joining Interface : Micro-Parallel Seam Joining and Development of Joining Equipment (3rd Report) Newly Developed Micro-Parallel Seam Joining Equipment and its Applications : Micro-Parallel Seam Joining and Development of Joining Equipment (4th Report) Welding Characteristics with a 1.2kW CW YAG Laser Light Transmitted through a Fiber Solidification Control of Austenitic Stainless Steel Weld Metal by Electromagnetic Stirring Analytical Study on Hydrogen Induced Cracking in HT-Steel Welds Predictive Equation for Cooling Time t_<8/5> of CTS Test Welds Effects of δ Ferrite Morphology on Low Temperature Fracture Toughness of SUS304L Steel Weld Metal Improvement in Bonding Strength of Si_3N_4-Mo Joint by Controlling Reaction Layer Thickness The Effect of Cooling Rate on Mechanical Properties of Underwater Wet Welds in Gravity Arc Welding The Effect of Pressure on Welding Results and Welding Phenomena in Gravity Arc Welding Effects of Chromium and Nickel on Nitrogen Absorption of Iron Weld Metal during Gas Tungsten Arc Welding 奥付 BACKCOVER
インターネットで読める国立国会図書館
目次COVER CONTENTS CONTENTS Members of the Editorial Committee of Transactions of the Japan Welding Society Profile of the Japan Welding Society Magnetically Impelled Arc Butt Welding of Aluminium Pipes Weld Decay Recovery by Laser Beam Surfacing of Austenitic Stainless Steel Welded Joints Effect of Pulsed Welding Current on Solidification Cracking in Austenitic Stainless Steel Welds Effects of Helium Pressure on Characteristics of TIG Arcs and Mechanical Properties of Welds Numerical Evaluation of Stress Intensity Factors at Crack Tips in Weldments Impact Characteristics of Diffusion Bonds of Ferritic Spheroidal Graphite Cast Iron Carbide Precipitation and Corrosion Resistance in HAZ of 15Cr-75Ni Alloy Study on Friction Welding of Titanium and Type 304L Austenitic Stainless Steel Appiication of Amorphous Cu-Ti Filler Metal to Joining of Silicon Nitride 奧付 BACKCOVER
インターネットで読める国立国会図書館
目次COVER CONTENTS CONTENTS Members of the Editorial Committee of Transactions of the Japan Welding Society Profile of the Japan Welding Society A Study on Pop-in Phenomenon in CTOD Test for Weldments Remote Control Monitoring Equipment for Welding Arc Algorithm to Obtain Parameters for Fillet Welding in a Flat Positions Using the CO_2 Arc Welding CTOD Behavior of Steel Weld with 500 MPa Class Strength and HAZ-CTOD Characteristics of Newly Developed Low Al-B-N Steel Effect of Collision Angle on the Result of Electromagnetic Welding of Aluminum : Study on Electromagnetic Welding, Report 3 The Effect of Argon Pressure on the TIG Arc Welding Application of Laser Beam Welding to Thin Steel Sheet Effect of Rolling Direction on Hydrogen Induced Crack Propagation Behavior in HT-80 Welds Effect of Copper Oxide on Joint Strength of Friction Welding of Copper-Tungsten Sintered Alloy to Tough Pitch Copper Inference of Mechanical Properties of Heat Treated Steel from Ultrasonic Attenuation and Velocity Measurements Effect of Microstructure on Fracture Toughness of SUS329J1 Duplex Stainless Steel Welds Study on Laser Surface Melting of Carbon Steels in Controlled Atmospheres Development of Welding CAD/CAM System for Large-Size Steel Structures 奧付 BACKCOVER
インターネットで読める国立国会図書館
目次COVER CONTENTS CONTENTS Members of the Editorial Committee of Transactions of the Japan Welding Society Profile of the Japan Welding Society The Influence of Oxgen on the Weldability of Diffusion Bonds between Aluminum Bronze and Austenitic Stainless Steel Effects of Chromium and Nickel on Nitrogen Absorption of Arc-Melted Iron Fatigue Crack Propagation Curve for Design of Welded Structures Avoidance of Hardening in Cast Iron Weld Metal by Use of Magnetic Oscillating Effect of Welding Arc Study on Laser Cutting of Concrete Effect of Silicon on Oxygen Absorption by Steel Weld Metal during Arc Welding Metal Transfer and Spatter Loss in Double Gas Shielded Metal Arc Welding Using Flux-Cored Wire : Study on Double Gas Shielded Metal Arc Welding (Report 2) The Estimation of Welding Residual Stresses by Using Simulated Inherent Strains Theoretical Research on Transient Liquid Insert Metal Diffusion Bonding of Nickel Base Alloys Bonding of Si_3N_4 to Metals with Active Filler Metals 奥付 BACKCOVER
書誌情報
この資料の詳細や典拠（同じ主題の資料を指すキーワード、著者名）等を確認できます。
- 資料種別
- 電子書籍・電子雑誌
- 本文の言語コード
- ENG
- 国立国会図書館永続的識別子
- info:ndljp/pid/10387702
- コレクション（個別）
- 国立国会図書館デジタルコレクション > 電子書籍・電子雑誌 > 学術機関 > 学協会
- 収集根拠
- NII-ELS
- 公開開始日（W3CDTF）
- 2017-08-30
- 受理日（W3CDTF）
- 2017-07-27T09:11:55+09:00
- オンライン閲覧公開範囲
- インターネット公開