本資料は、掲載誌(URI)等のリンク先にある学位授与機関のWebサイトやCiNii Dissertationsから、本文を自由に閲覧できる場合があります。
博士論文
国立国会図書館館内限定公開
収録元データベースで確認する
国立国会図書館デジタルコレクション
デジタルデータあり
公開元のウェブサイトで確認する
DOI[10.14943/doctoral.r7078]のデータに遷移します
Solidification and Segregation in Continuously Cast Steel
- 国立国会図書館永続的識別子
- info:ndljp/pid/11479210
国立国会図書館での利用に関する注記
資料に関する注記
一般注記:
- In this study, the approximate analytical solutions for the solidus temperature which strongly depends on the steel composition were sought as the par...
書店で探す
障害者向け資料で読む
全国の図書館の所蔵
国立国会図書館以外の全国の図書館の所蔵状況を表示します。
所蔵のある図書館から取寄せることが可能かなど、資料の利用方法は、ご自身が利用されるお近くの図書館へご相談ください
書店で探す
障害者向け資料で読む
書誌情報
この資料の詳細や典拠(同じ主題の資料を指すキーワード、著者名)等を確認できます。
デジタル
- 資料種別
- 博士論文
- 著者・編者
- 藤村, 俊生
- 著者標目
- 出版年月日等
- 2019-03-25
- 出版年(W3CDTF)
- 2019-03-25
- 並列タイトル等
- 鋼の連続鋳造における凝固と偏析に関する研究
- 寄与者
- 鈴木, 亮輔松浦, 清隆岩井, 一彦大野, 宗一大参, 達也
- 授与機関名
- 北海道大学
- 授与年月日
- 2019-03-25
- 授与年月日(W3CDTF)
- 2019-03-25
- 報告番号
- 乙第7078号
- 学位
- 博士(工学)
- 博論授与番号
- 乙第7078号
- 本文の言語コード
- eng
- NDC
- 対象利用者
- 一般
- 一般注記
- In this study, the approximate analytical solutions for the solidus temperature which strongly depends on the steel composition were sought as the part of the solutions of the nonlinear heat- and solutes- transfer equations in the mushy zone of the continuously cast steel. Because the conventional theories of the solidification of the multicomponent steel were not well grounded due to the highly nonlinear phenomenon complicated by the time depending phase change interface. Neither analytic nor approximate solutions existed that describe the relation between the size of the mushy zone (the solid-liquid zone) and the volumetric energy generation. In addition, owing to the lack of the reliable measurements in the real casting process due to the difficulties of measurements, the significant discrepancies exist between the estimates of the solidus temperature and the thermo-analytical measurements by the small specimens of the various grades steel. This may cause the considerable errors in the accuracy of the numerical heat analysis to estimate the shell thickness and the solid fraction at the target point in the mushy zone of the continuously cast steel. The simultaneous solutions of the non-linear heat- and solutes equations were sought step by step through the three model, assuming the linear relation between solid fraction and temperature in the mushy zone. (1) Model Ⅰ: Develop the mathematical treatment to simultaneously solve the heat- and solutes- transfer equations, with the simple boundary conditions (Dirichlet conditions), adopting the measured solidification constants which represent the boundary positions with respect to time. (2) Model Ⅱ: Incorporate the Neumann’s boundary conditions (i.e., equal derivative values at the boundary front and back) which are generally used in the numerical analysis for the solid- liquid zone in the model. The solidification of the Fe-C binary steel was investigated to make the model as simple as possible. The model predictions were in good agreement with the numerical heat analysis and were also consistent with Neumann’s solution at the low carbon range. (3) Model Ⅲ: Obtain the solidus temperature of the multicomponent general steel by expanding the Model Ⅱ to the multicomponent steel. The predicted solidus temperatures of the various grades steel were in reasonable agreement with the measured zero ductility temperature of the high manganese steel and the thermo- analytical measurements. It was also shown that the conventional numerical heat analysis, such as the equivalent specific heat method, adopting the solidus temperature predicted by the model was in good agreement with that of Model Ⅲ. The model can reduce the extensive numerical computational load to seek the solidus temperature. The models and the predicted solidus temperature were, subsequently, used in the numerical heat analyses to estimate the solid fraction at which the electro magnetic stirring was applied in the continuously cast steel ii slabs. The industrial findings with these numerical heat analyses and the analog study with Pb-Sn alloy showed that the stirring at the low fraction solid was important to refine crystals and to improve the macrosegregations, in the continuously cast steel. The methods to transform the partial differential equations to ordinary equations and the boundary conditions adopted in the models were as shown in Table 1.(主査) 教授 鈴木 亮輔, 特任教授 松浦 清隆, 教授 岩井 一彦, 准教授 大野 宗一, 准教授 大参 達也工学院(材料科学専攻)
- DOI
- 10.14943/doctoral.r7078
- 国立国会図書館永続的識別子
- info:ndljp/pid/11479210
- コレクション(共通)
- コレクション(障害者向け資料:レベル1)
- コレクション(個別)
- 国立国会図書館デジタルコレクション > デジタル化資料 > 博士論文
- 収集根拠
- 博士論文(自動収集)
- 受理日(W3CDTF)
- 2020-04-06T03:04:11+09:00
- 作成日(W3CDTF)
- 2018-09
- 記録形式(IMT)
- PDF
- オンライン閲覧公開範囲
- 国立国会図書館内限定公開
- デジタル化資料送信
- 図書館・個人送信対象外
- 遠隔複写可否(NDL)
- 可
- 連携機関・データベース
- 国立国会図書館 : 国立国会図書館デジタルコレクション