並列タイトル等アルカリ塩化物蒸気を含有する雰囲気中におけるNi基合金の高温腐食挙動に関する研究
一般注記In the waste incineration environments, the corrosion become the major problem due to high chlorine concentration in waste and its ability to cause rapid corrosion of metal components such as boiler tubes and heat exchanger tubes during the combustion process. During combustion, alkali salts are released into the oxidizing environments and react with the metallic component. The chlorine from salts strongly accelerates the corrosion/oxidation and results in faster degradation of materials. Thus, improving the corrosion resistance of the material used in the boiler component directly links to the lifetime of the plants. Ni based alloys and coatings are widely used for the boiler component because their excellent corrosion performance. Mo and Fe are widely used as alloying elements to improve the corrosion performance, however, the effect of those elements on the corrosion behavior of alloys in atmosphere containing alkali metal chlorides has not been fully understood, yet. Thus, in this study, the corrosion behavior of Ni20Cr-based alloy with Mo or Fe additions in atmospheres containing air and salt-vapor was evaluated. This thesis consists of seven chapters in total. Chapter 1 introduced the research background, the literature studies, the scope and aims of research study, and the outline of study. Chapter 2 described the details of experimental methods. Ni20Cr-based alloy were fabricated with variations of Mo (0, 1, 3, 7 in wt.%) and Fe (0, 4, 30 in wt.%) additions. The corrosion was performed at 570 ℃ in oxidizing atmosphere (air with salt vapor) and low oxidizing atmosphere (Ar with salt vapor). Chapter 3 investigated the corrosion performance of Ni20Cr alloys with combinations of Mo and Fe additions and evaluated the combination effect of each element on corrosion performance of alloys. The results showed that combination of Mo and Fe additions gives better corrosion resistance to the Ni20Cr-based alloys. The corrosion performance was found to be improved with increased both Mo and Fe contents. Chapter 4 investigated the effects of Mo addition on the corrosion behavior of Ni20Cr-based alloys in oxidizing-chlorine containing atmosphere. The Mo-free Ni20Crbased alloy corroded with a high corrosion rate due to a formation of chromates. Chromate formation was considered to be the main reason to increase the corrosion rate, since it caused breakdown of the protective Cr2O3 scale accompanied with generation of chlorine. The Mo addition has given better corrosion performance because it promoted NiO scale formation, which was able to suppress the chromate formation. Chapter 5 investigated the effects of Mo on the corrosion behavior of Ni20Cr-based alloy in the low oxidizing atmosphere in order to confirm the mechanism proposed in the chapter 4. The corrosion mass gain of Mo-free Ni20Cr-based alloy decreased significantly comparing to that in the oxidizing-chlorine containing atmosphere. But the corrosion rate of the Mo-containing alloys was found to increase. Decreasing the corrosion rate in the Mofree alloy was attributed by less chromate formation, by which the corrosion mechanism proposed in chapter 4 was confirmed. Chapter 6 investigated the effects of Fe on the corrosion behavior of Ni20Cr-based alloy in the oxidizing atmosphere. Fe addition to Ni20Cr-based alloy was also found to improve the corrosion resistance in the oxidizing-chlorine containing atmosphere. Although the oxide scale structure formed on the Fe containing alloys were similar to that formed on the Fe-free alloy. Lesser extent of chromate formation due to the Fe oxide formation resulted in thinner internal Cr-chloride penetration and Cr-depleted zone. Thus, a continuous Cr2O3 scale was able to protect the alloy substrate. In Chapter 7, the main conclusion of the research was discussed.
(主査) 准教授 林 重成, 教授 橋本 直幸, 教授 上田 幹人
工学院（材料科学専攻）
コレクション（個別）国立国会図書館デジタルコレクション > デジタル化資料 > 博士論文
受理日（W3CDTF）2022-11-07T16:56:35+09:00
連携機関・データベース国立国会図書館 : 国立国会図書館デジタルコレクション