並列タイトル等ND:YVO4ナノ秒レーザーを使用したジルコニアコーピングの新しい加工法
一般注記The purpose of this work was to fabricate zirconia copings from fully sintered Y-TZP blocks using a Nd:YVO4 nanosecond laser in order to avoid complicated procedures using conventional CAD/CAM systems. To determine the most appropriate power level of a Nd:YVO4 laser, cuboid fully sintered Y-TZP specimens were irradiated at six different average power levels. One-way ANOVAs for the average surface roughness and laser machining depth revealed that an average power level of 7.5 W generated a smooth machined surface with high machining efficiency. Y-TZP copings were then machined using the proposed method with the most appropriate power level. As the number of machining iterations increased, the convergence angles decreased significantly (p<0.01). The accuracy of the machined copings was judged to be good based on 3D measurements and traditional metal die methods. The proposed method using the nanosecond laser was demonstrated to be useful for fabricating copings from fully sintered Y-TZP.
2013
元資料の権利情報 : 日本歯科理工学会
元資料の権利情報 : CC BY-NC-ND
DOIinfo:doi/10.4012/dmj.2013-348
コレクション(個別)国立国会図書館デジタルコレクション > デジタル化資料 > 博士論文
受理日(W3CDTF)2015-02-03T05:25:05+09:00
連携機関・データベース国立国会図書館 : 国立国会図書館デジタルコレクション