天然ゴム系積層ゴムアイソレータの圧縮限界耐力
Digital data available（科学技術振興機構）
Begin reading now
J-STAGE
Holdings of Libraries in Japan
This page shows libraries in Japan other than the National Diet Library that hold the material.
Please contact your local library for information on how to use materials or whether it is possible to request materials from the holding libraries.
other
J-STAGE
DigitalCiNii Research
Search ServiceDigitalYou can check the holdings of institutions and databases with which CiNii Research is linked at the site of CiNii Research.
Bibliographic Record
You can check the details of this material, its authority (keywords that refer to materials on the same subject, author's name, etc.), etc.
- Material Type
- 記事
- Author/Editor
- 高山 峯夫森田 慶子多田 英之
- Periodical title
- 日本建築学会構造系論文集 = Journal of structural and construction engineering : transactions of AIJ
- No. or year of volume/issue
- (通号 482) 1996.04
- Sequential issue number
- 482
- Pages
- 43～51
- Publication date of volume/issue (W3CDTF)
- 1996-04
- ISSN (Periodical Title)
- 1340-4202
- ISSN-L (Periodical Title)
- 1340-4202
- Publication (Periodical Title)
- 東京 : 日本建築学会
- Place of Publication (Country Code)
- JP
- Text Language Code
- jpn
- NDLC
- Target Audience
- 一般
- Holding library
- 国立国会図書館
- Call No.
- Z16-1419
- Data Provider (Database)
- 国立国会図書館 : 国立国会図書館雑誌記事索引
- Bibliographic ID (NDL)
- 3947360
- Bibliographic Record Category (NDL)
- 632
- Summary, etc.
- This paper presents the ultimate load capacity of natural rubber bearings. The failure experiments of rubber bearings was carried out in order to clarify the ultimate loading capacity. As the results, the ultimate strength of rubber bearing was over 1500kg/cm^2 in compressive stress. It was found that the ultimate capacity of rubber bearing depended on the amount of the strength and plastic deformation of interlayer steel plates. And also, the experimental results was simulated by Finite Element (FE) analysis. FE analysis show the plastic strain distribution of the steel plates. Based on the experimental results and analysis results, the ultimate load capacity of natural rubber bearing was discussed.
- DOI
- 10.3130/aijs.61.43_1
- Access Restrictions
- インターネット公開
- Data Provider (Database)
- 科学技術振興機構 : J-STAGE
- Summary, etc.
- This paper presents the ultimate load capacity of natural rubber bearings. The failure experiments of rubber bearings was carried out in order to clarify the ultimate loading capacity. As the results, the ultimate strength of rubber bearing was over 1500kg/cm^2 in compressive stress. It was found that the ultimate capacity of rubber bearing depended on the amount of the strength and plastic deformation of interlayer steel plates. And also, the experimental results was simulated by Finite Element (FE) analysis. FE analysis show the plastic strain distribution of the steel plates. Based on the experimental results and analysis results, the ultimate load capacity of natural rubber bearing was discussed.
- DOI
- 10.3130/aijs.61.43_1
- Access Restrictions
- インターネット公開
- Related Material (URI)
- Is Referenced By
- 高速炉に適用する厚肉積層ゴムの研究開発（1/2縮尺厚肉積層ゴムを用いた静的載荷試験に基づく履歴モデルの構築）高層免震共同住宅を対象とした積層ゴムアイソレータの引き抜きに及ぼす地震動水平・上下両成分同時入力による影響
- References
- Elastic stability of rubber compression springsThe Compression of Bonded Rubber Blocks
- Data Provider (Database)
- 国立情報学研究所 : CiNii Research
- Original Data Provider (Database)
- Japan Link Center雑誌記事索引データベースCrossrefCiNii ArticlesCiNii ArticlesCrossrefCrossref
- Bibliographic ID (NDL)
- 3947360
- NAID
- 11000430316610004001371