Comparative Study of Nd:YAG Laser-Induced Breakdown Spectroscopy And Transversely Excited Atmospheric CO2 Laser-Induced Gas Plasma Spectroscopy on Chromated Copper Arsenate Preservative-Treated Wood

• Material Type: 文書・図像類
• Title: Comparative Study of Nd:YAG Laser-Induced Breakdown Spectroscopy And Transversely Excited Atmospheric CO2 Laser-Induced Gas Plasma Spectroscopy on Chromated Copper Arsenate Preservative-Treated Wood
• Author/Editor: KHUMAENI, Ali; LIE, Zener Sukra; NIKI, Hideaki; LEE, Yong Inn; KURIHARA, Kazuyoshi; WAKASUGI, Motoomi; TAKAHASHI, Touru; KAGAWA, Kiichiro
• Author Heading: KHUMAENI, Ali; LIE, Zener Sukra; NIKI, Hideaki; LEE, Yong Inn; KURIHARA, Kazuyoshi; WAKASUGI, Motoomi; TAKAHASHI, Touru; KAGAWA, Kiichiro
• Publication, Distribution, etc.: Optical Society of America
• Publication Date: 2012
• Publication Date (W3CDTF): 2012
• Periodical title: Applied optics
• No. or year of volume/issue: 51
• Volume: 51
• Pages: B121-B129
• ISSN (Periodical Title): ISSN : 1559-128X
• Text Language Code: eng
• Target Audience: 一般
• Note (General): Taking advantage of the specific characteristics of a transversely excited atmospheric (TEA) CO2 laser, a sophisticated technique for the analysis of chromated copper arsenate (CCA) in wood samples has been developed. In this study, a CCA-treated wood sample with a dimension of 20 mm× 20 mm and a thickness of 2 mm was attached in contact to a nickel plate (20 mm× 20 mm× 0.15 mm), which functions as a subtarget. When the TEA CO2 laser was successively irradiated onto the wood surface, a hole with a diameter of approximately 2.5 mm was produced inside the sample and the laser beam was directly impinged onto the metal subtarget. Strong and stable gas plasma with a very large diameter of approximately 10mm was induced once the laser beam had directly struck the metal subtarget. This gas plasma then interacted with the fine particles of the sample inside the hole and finally the particles were effectively dissociated and excited in the gas plasma region. By using this technique, high precision and sensitive analysis of CCA-treated wood sample was realized. A linear calibration curve of Cr was successfully made using the CCA-treated wood sample. The detection limits of Cr, Cu, and As were estimated to be approximately 1, 2, and 15 mg〓kg, respectively. In the case of standard LIBS using the Nd:YAG laser, the analytical intensities fluctuate and the detection limit was much lower at approximately one-tenth that of TEA CO2 laser.
• Source: https://u-fukui.repo.nii.ac.jp/?action=repository_action_common_download&item_id=22750&item_no=1&attribute_id=22&file_no=1
• Access Restrictions: 限定公開
• Data Provider (Database): 国立情報学研究所 : 学術機関リポジトリデータベース（IRDB）（機関リポジトリ）; https://irdb.nii.ac.jp
• Original Data Provider (Database): 福井大学 : 福井大学学術機関リポジトリ