Plastic joining of open-cell nickel foam and polymethyl methacrylate (PMMA) sheet by friction stir incremental forming

Material type: 文書・図像類

Author: Matsumoto, Ryoほか

Publisher: -

Publication date: 2020-03-24

Material Format: Digital

Capacity, size, etc.: -

NDC: -

View All

Notes on use

Note (General)：: Friction stir incremental forming (FSIF) process was applied to join a commercial open-cell type nickel foam with a polymethyl methacrylate (PMMA) she...

Search by Bookstore

Holdings of Libraries in Japan

This page shows libraries in Japan other than the National Diet Library that hold the material.

List of Cooperating Institutions and Databases

Please contact your local library for information on how to use materials or whether it is possible to request materials from the holding libraries.

other

Ｕｎｉｖｅｒｓｉｔｙ　ｏｆ　Ｆｕｋｕｉ　Ａｃａｄｅｍｉｃ　Ｒｅｐｏｓｉｔｏｒｙ
Digital
You can check the holdings of institutions and databases with which Institutional Repositories DataBase(IRDB)(Institutional Repository) is linked at the site of Institutional Repositories DataBase(IRDB)(Institutional Repository).
Ｕｎｉｖｅｒｓｉｔｙ　ｏｆ　Ｆｕｋｕｉ　Ａｃａｄｅｍｉｃ　Ｒｅｐｏｓｉｔｏｒｙ

Search by Bookstore

Bibliographic Record

You can check the details of this material, its authority (keywords that refer to materials on the same subject, author's name, etc.), etc.

Digital

Material Type: 文書・図像類
Title: Plastic joining of open-cell nickel foam and polymethyl methacrylate (PMMA) sheet by friction stir incremental forming
Author/Editor: Matsumoto, Ryo
Sakaguchi, Harutaka
Otsu, Masaaki
Utsunomiya, Hiroshi
Author Heading: Matsumoto, Ryo
Sakaguchi, Harutaka
Otsu, Masaaki
Utsunomiya, Hiroshi
Publication Date: 2020-03-24
Publication Date (W3CDTF): 2020-03-24
Alternative Title: Plastic joining of open-cell nickel foam and polymethyl methacrylate (PMMA) sheet by friction stir incremental forming
Periodical title: Journal of Materials Processing Technology
No. or year of volume/issue: 282
Volume: 282
Pages: 116691-116691
ISSN (Periodical Title): ISSN : 0924-0136
Text Language Code: eng
Subject Heading: Dissimilar joining
Friction heating
Incremental forming
Nickel foam
Polymethyl methacrylate (PMMA)
Target Audience: 一般
Note (General): Friction stir incremental forming (FSIF) process was applied to join a commercial open-cell type nickel foam with a polymethyl methacrylate (PMMA) sheet for fabrication of porous metal–nonporous resin composite. In this process, a rotating rod-shaped tool was vertically pushed and horizontally fed against the sheet on the foam. The sheet was frictionally heated and incrementally deformed by the rotating tool, while the cellular matrix of the foam was not plastically deformed. The sheet with a thickness of 1.0mm was joined with the foam under FSIF conditions of rotation rate faster than 2000 rpm and feed rate slower than 60 mm/min. The joining strength between the foam and the sheet was investigated by performing tensile test. The joining strength was obtained over the fracture strength of the foam. The joining mechanism of the foam and the sheet was discussed from the microscopic observation of the foam–sheet interface and the temperature change in the sheet. It is concluded that the sheet was mechanically interlocked (anchored) to the porous structure of the foam by the plastic flow of the heated and softened PMMA into the surface pores of the foam.
Access Restrictions: 限定公開
Related Material (DOI): 10.1016/j.jmatprotec.2020.116691
Data Provider (Database): 国立情報学研究所 : 学術機関リポジトリデータベース（IRDB）（機関リポジトリ）
https://irdb.nii.ac.jp
Original Data Provider (Database): 福井大学 : 福井大学学術機関リポジトリ