強制循環方式鉛ビスマス冷却中型炉の炉心・燃料設計検討; 平成16年度研究成果のまとめ, (研究報告)

• Material Type: 文書・図像類
• Title: 強制循環方式鉛ビスマス冷却中型炉の炉心・燃料設計検討; 平成16年度研究成果のまとめ, (研究報告)
• Author/Editor: 山下 巧; 三田 敏男; 水野 朋保
• Author Heading: 山下 巧; 三田 敏男; 水野 朋保
• Publication Date: 2005-08
• Publication Date (W3CDTF): 2005-08
• Alternative Title: Design study of medium size forced circulation lead-bismuth cooled core
• Periodical title: JNC TN9400 2005-039
• Text Language Code: jpn
• Target Audience: 一般
• Note (General): FBRサイクル実用化戦略調査研究(FS)においては、様々な冷却材を用いた高速増殖炉が検討されており、その候補の1つとして鉛ビスマス冷却炉の設計研究を実施している。本研究では最近の鉛ビスマス中の材料腐食の実験結果を反映して、平成15年度に実施した鉛ビスマス冷却中型炉の炉心・燃料の仕様を見直した。; In "Feasibility Studies on Commercialized Fast Breeder Reactor Cycle System(FS)", various types of fast breeder reactor using different coolant have been studied, in which lead-bismuth is one of the subject. In this study, design studies of medium size forced circulation (FC) reactor were carried out using newly proposed correlation in evaluation for clad outside surface corrosion and in restriction on the maximum clad outside surface temperature to 570$^{\circ}$C based on the design in JFY 2003. The influence of changes in foregoing design conditions on core performances of the FC reactor was smaller than that of natural circulation (NC) reactor, and consequently, design of the FC core (outputs were 1980MWt, 750MWe) was performed to meet demands for coolant velocity, bundle pressure loss and so on. The designed core was larger than that designed in JFY 2002 because of increase in fuel pin diameter and fuel pin pitch. The main specifications for the designed core were as follows; with no radial blanket, fuel pin diameter of 8.0mm, core height of 70cm, core equivalent diameter of 4.43m, envelope diameter of radial shielding region of 5.35m. The main core performances were as follows; operation period of 18 months, burn-up of over 150GWd/t, and breeding ratio of 1.10 for the breeding core and 1.04 for the break even core. They achieved the performance targets in the FS within the condition where envelope diameter of radial shielding region was less than 5.5m. Fast fluence was not restricted in anticipation of improvements on materials in the future. When it was restricted to the development target of ODS steel and PNC-FMS steel (5$\times$10$^{23}$n/cm$^{2}$, E$>$0.1Mev), the burn-up was about 125GWd/t. From these results, prospect of possibility of core manufacture was gained within the new design conditions of clad corrosion and temperature.
• Source: /JNC-TN9400-2005-039.pdf （fulltext）; https://jopss.jaea.go.jp/pdfdata/JNC-TN9400-2005-039.pdf
• Access Restrictions: 限定公開
• Data Provider (Database): 国立情報学研究所 : 学術機関リポジトリデータベース（IRDB）（機関リポジトリ）; https://irdb.nii.ac.jp
• Original Data Provider (Database): 日本原子力研究開発機構 : JOPSS:JAEA Originated Papers Searching System

• Summary, etc.: FBRサイクル実用化戦略調査研究(FS)においては、様々な冷却材を用いた高速増殖炉が検討されており、その候補の1つとして鉛ビスマス冷却炉の設計研究を実施している。本研究では最近の鉛ビスマス中の材料腐食の実験結果を反映して、平成15年度に実施した鉛ビスマス冷却中型炉の炉心・燃料の仕様を見直した。In ...