Jump to main content
電子書籍・電子雑誌

VS tech : the ... International Symposium on Advanced Technology of Vibration and Sound

Persistent ID (NDL)
info:ndljp/pid/10356201
Material type
電子書籍・電子雑誌
Author
-
Publisher
日本機械学会
Publication date
-
Material Format
Digital
Capacity, size, etc.
-
NDC
-
View All

List of volumes and issues

1 Records

VS tech : the ... International Symposium on Advanced Technology of Vibration and Sound 2005
Publication2005-05-31
Available onlineNational Diet Library
Table of ContentsCOVER The First International Symposium on Advanced Technology of Vibration and Sound(EDITORIAL BOARD) COPYRIGHT INFORMATION Organized Session and Organizer CONTENTS June 1(Divisional title) Room I(Divisional title) 101 The Study of Dynamic Balancing for High-Speed Presses(O.S.2 Vibration and Noise Reduction Technology I) 102 REDUCTION OF VIBRATORY STRESS OF COMPRESSOR VANE BY USE OF FRICTION DAMPER(O.S.2 Vibration and Noise Reduction Technology I) 103 THEORETICAL AND EXPERIMENTAL INVESTIGATION FOR EFFECT OF WHEEL ALIGHNMENT ON RUNNING PERFORMANCE OF AUTOMOBILES(O.S.2 Vibration and Noise Reduction Technology I) 104 FINITE ELEMENT METHOD FOR NATURAL FREQUENCY ANALYSIS OF STATOR CORE IN INDUCTION MOTOR (K-MODEL)(O.S.2 Vibration and Noise Reduction Technology I) 105 IDENTIFICATION AND REDUCTION OF NONLINEAR OIL VIBRATIONS IN JOURNAL BEARINGS(O.S.2 Vibration and Noise Reduction Technology I) 106 REDUCTION OF FLOW GENERATED NOISE OF AIRFOILS BY MEANS OF ACOUSTICALLY SOFT COATING(O.S.2 Vibration and Noise Reduction Technology II) 107 DESIGNING A LOW-NOISE GEARBOX BY USING VIBRATION AND SOUND-RADIATION ANALYSIS OF A GEAR SYSTEM(O.S.2 Vibration and Noise Reduction Technology II) 108 FAN NOISE AND RESONANCE FREQUENCY ANALYSIS IN FAN-COOLED INDUCTION MOTOR(O.S.2 Vibration and Noise Reduction Technology II) 109 STUDY ON REDUCTION OF BOOM NOISE ABOUT AGRICULTURAL MACHINERY : CONTROL OF SOUND FIELD IN THE CABIN USING ACOUSTIC DYNAMIC ABSORBER(O.S.2 Vibration and Noise Reduction Technology II) Room II(Divisional title) 201 AUTONOMOUS DIRECTIVITY MICROPHONE SYSTEM BASED ON THE SPATIO-TEMPORAL BLIND SOURCE SEPARATION ALGORITHM(O.S.4 Measurement and Sensor I) 202 MEASUREMENT AND ANALYSIS OF TRANSFER FUNCTIONS OF ELECTRO-ACOUSTICAL AND MECHANICAL SYSTEMS(O.S.4 Measurement and Sensor I) 203 A STUDY ON BASIC PERFORMANCE COMPARISON WITH ACOUSTIC HOLOGRAPHY AND MUSIC METHODS IN SOUND SOURCE IDENTIFICATION(O.S.4 Measurement and Sensor I) 204 EXPERIMENTAL RESULTS OF CONVERTED NAH METHOD(O.S.4 Measurement and Sensor I) 205 SCANNING OF ACOUSTIC BEAM USING DECENTERING OPERATION FOR ANNULAR TRANSDUCER ARRAY(O.S.4 Measurement and Sensor I) 206 FAULT DIAGNOSIS SYSTEM OF INDUCTION MOTORS USING FEATURE EXTRACTION, FEATURE SELECTION AND CLASSIFICATION ALGORITHM(General Session I) 207 ACOUSTIC DIAGNOSIS TECHNIQUE FOR A FAILURE ROLLING BEARING BY ADAPTIVE SIGNAL PROCESSING ALGORITHM : CHARACTERISTICS OF APPLING NOISE CANCELLER(General Session I) 209 A STUDY ON ESTIMATION OF THICKNESS OF BEAM BY STRUCTURAL INTENSITY(General Session I) June 2(Divisional title) Advanced Sensors for Monitoring Our Environment(Keynote Lecture (1)) Room I(Divisional title) 110 Vibration measurement of MRI device(O.S.4 Measurement and Sensor II) 111 STUDY ON A TACTILE SENSOR WITH A LONGITUDINAL RESONATOR INTEGRATED WITH A FORCE SENSOR OF THE FREQUENCY CHANGE TYPE(O.S.4 Measurement and Sensor II) 112 THE NEW MEASUREMENT METHOD OF SOUND PRESSURE LEVEL FOR A HIGH FREQUENCY ULTRASONIC CLEANING MACHINE USING LASER DOPPLER VIBROMETER(O.S.4 Measurement and Sensor II) 113 EFFECTS OF BOUNDARY ON THE MEASUREMENT OF VIBRATION INTENSITY(O.S.4 Measurement and Sensor II) 114 ACCURACY EVALUATION OF THE SOUND POWER MEASUREMENT BY THE SOUND PRESSURE AND THE SOUND INTENSITY METHODS(O.S.4 Measurement and Sensor II) 115 HIGH SPEED POSITIONING CONTROL OF A FLEXIBLE ARM BY ACCELERATION INPUT(O.S.2 Vibration and Noise Reduction Technology III) 116 OPTIMUM DESIGN OF HYBRID VIBRATION SUPPRESSION USING PIEZOELECTRIC ELEMENTS(O.S.2 Vibration and Noise Reduction Technology III) 117 Generation of a Quiet Zone in a Thin Plate Using ABC(O.S.2 Vibration and Noise Reduction Technology III) 118 ACTIVE POWER FLOW CONTROL OF A PLANAR STRUCTURE : GENERATION OF A QUIET ZONE BY USING CLUSTER FEEDBACK CONTROL(O.S.2 Vibration and Noise Reduction Technology III) 119 FREQUENCY CHARACTERISTICS OF ULTRASONIC PLASTIC WELDING : 27kHz TO 180kHz ULTRASONIC PLASTIC WELDING SYSTEMS(O.S.1 Usage of Sound Energy) 120 POWDERTRANSPORTATION DEVICE USING A UNIMORPH PIEZOELECTRIC ACTUATOR(O.S.1 Usage of Sound Energy) 121 ENERGY DECAY AND AMPLITUDE ATTENUATION BY MICRO-BUBBLES IN ULTRASONIC WAVE PROPAGATION(O.S.1 Usage of Sound Energy) 122 NON-CONTACT TRANSPORTATION SYSTEM USING NEAR-FIELD ACOUSTIC LEVITATION AT A FREQUENCY OF 40kHz(O.S.1 Usage of Sound Energy) Room II(Divisional title) 210 USAGE OF ULTRASONIC VIBRATION FOR REDUCTION OF RESIDUAL STRESS ON WELDED JOINT(O.S.5 Advanced Technology for Usage of Sound and Vibration I) 211 CONFIGURATIONS OF LARGE CAPACITY ULTRASONIC COMPLEX VIBRATION SOURCES WITH COMPLEX TRANSVERSE VIBRATION RODS AND A DISK WITH MULTIPLE TRANSDUCERS(O.S.5 Advanced Technology for Usage of Sound and Vibration I) 212 EFFECTS OF ULTRASONIC VIBRATIONS ON A TURBULENT SQUARE-DUCT FLOW(O.S.5 Advanced Technology for Usage of Sound and Vibration I) 213 Removal of the Fouling inside a Pipe using Ultrasonic Waves(O.S.5 Advanced Technology for Usage of Sound and Vibration I) 214 FEEDBACK CONTROL OF AN ACTIVE SOUND INSULATION UNIT(O.S.3 Noise and Sound Control I) 215 ACTIVE NOISE CONTROL FOR A MOVING EVALUATION POINT USING IMPULSE RESPONSE INTERPOLATION METHOD(O.S.3 Noise and Sound Control I) 216 FLOW-INDUCED NOISE GENERATED FROM INTAKE PIPE OF A HIGH-SPEED ENGINE(O. S. 3 Noise and Sound Control I) 217 A STUDY ON NOISE-GENERATION CHARACTERISTICS OF 4-CYLINDER DIESEL ENGINE USING SINGLE EXPLOSION EXCITATION(O.S.3 Noise and Sound Control I) 218 THE DYNAMIC EQUATION AND SIMULATION OF A LINKAGE MECHANISM FABRICATED FROM THREE-DIMENSIONAL BRAIDED COMPOSITE MATERIALS(General Session II) 219 RESEARCH ON THE STIFFNESS AND BUFFERING CHARACTER OF ARTICULATED LEG MECHANISM OF DYNAMIC WALKING ROBOTS(General Session II) June 3(Divisional title) ACTIVE VIBRATION AND SOUND TRANSMISSION CONTROL OF PLATE STRUCTURES(Keynote Lecture (2)) 「Concerning History Culture of MIYAJIMA」(Special Lecture)(only title) Room I(Divisional title) 123 MULTI-LAYERED POLYURETHANE FOAMS FOR FLAT-WALLED ANECHOIC LININGS(O.S.3 Noise and Sound Control II) 124 PRACTICAL SOUND PACKAGE DESIGN BY STATISTICAL ENERGY ANALYSIS FOR EFFICIENT MID-HIGH FREQUENCY NOISE CONTROL IN A VEHICLE PASSENGER COMPARTMENT(O.S.3 Noise and Sound Control II) 125 ACTIVE CONTROL OF SOUND TRANSMISSION WITH POINT ACTUATORS UTILIZING THE MECHANISM OF ANTI-RESONANCE PHENOMENON(O.S.3 Noise and Sound Control II) 126 ACTIVE CONTROL OF PERIODIC NOISE IN FLAT SPACE BETWEEN TWO PARALLEL PLANES(O.S.3 Noise and Sound Control II) 127 STUDY ON VIBRO-ACOUSTIC CHARACTERISTICS OF SOUND BOARD STRUCTURE OF GUITAR AFFECTING SOUND QUALITY(O.S.3 Noise and Sound Control II) 128 Newly-developed Active Noise Absorption Control Technology for High Speed Fan Noise Reduction(O.S.5 Advanced Technology for Usage of Sound and Vibration II) 129 Newly-developed Compound Active Jet Noise Control Technology for Rectangular Jet Flow Noise Reduction(O.S.5 Advanced Technology for Usage of Sound and Vibration II) 130 REALIZATION OF NON-CONTACT ACTIVE VIBRATION CONTROL SYSTEM UTILIZING ACOUSTIC RADIATION PRESSURE(O.S.5 Advanced Technology for Usage of Sound and Vibration II) 131 EXPERIMENTAL STUDY ON PREDICTION OF SLEEP DURING WAKEFULNESS(O.S.5 Advanced Technology for Usage of Sound and Vibration III) 132 CONTROL OF HUMAN MOTION BY USE OF ONOMATOPOEIA(O.S.5 Advanced Technology for Usage of Sound and Vibration III) 133 STUDY ON PHASE LAG ON MOVEMENT OF PERMANENT MAGNETS(O.S.5 Advanced Technology for Usage of Sound and Vibration III) Room II(Divisional title) 221 AN ACTIVE MICROVIBRATION ISOLATOR WITH MAGNETIC SUSPENSION TECHNOLOGY(General Session III) 223 The study and application of isolation vibration technology of motorcycle engine(General Session III) 224 A NOVEL DESIGN OF BALL-TYPE AUTOMATIC BALANCER(General Session III) 225 A new active vibration isolation control method based on CMAC neural network(General Session III) 226 COMPLEX REAL SIGNAL MOTHER WAVELET AND ITS APPLICATION ON EXTRACTION OF ABNORMAL SIGNALS(General Session IV) 227 ANALYSIS OF INFLUENCE THAT STRONG MAGNETIC FIELD ENVIRONMENT CAUSES TO NOISE MEASUREMENT SYSTEM(General Session IV) 228 PRODUCTION OF FUEL GAS BY PLASMA REACTOR IN A LIQUID(General Session IV) 229 AN EXPERIMENTAL STUDY ON THE EFFECT OF THE VIBRATION ENERGY FLOW BY THE WELDING CHARACTRISTICS(General Session V) 230 Research of Karman Vortex Street Flowmeter for Resisting Vibration(General Session V) 231 VIBRATION DAMPING OF A FLEXIBLE STRUCTURE(General Session V) AUTHORS INDEX(Divisional title) AUTHORS INDEX Cooperation

Bibliographic Record

You can check the details of this material, its authority (keywords that refer to materials on the same subject, author's name, etc.), etc.

Digital

Material Type
電子書籍・電子雑誌
Publication, Distribution, etc.
Text Language Code
ENG
Persistent ID (NDL)
info:ndljp/pid/10356201
Collection (particular)
国立国会図書館デジタルコレクション > 電子書籍・電子雑誌 > 学術機関 > 学協会
Acquisition Basis
NII-ELS
Available (W3CDTF)
2017-06-22
Date Accepted (W3CDTF)
2017-05-19T11:30:20+09:00
Access Restrictions
インターネット公開