Jump to main content
電子書籍・電子雑誌

Creep : proceedings of the ... international conference on creep and fatigue at elevated temperatures

Persistent ID (NDL)
info:ndljp/pid/10356211
Material type
電子書籍・電子雑誌
Author
-
Publisher
日本機械学会
Publication date
-
Material Format
Digital
Capacity, size, etc.
-
NDC
-
View All

List of volumes and issues

1 Records

Creep : proceedings of the ... international conference on creep and fatigue at elevated temperatures 01-201
Publication2001-06-03
Available onlineNational Diet Library
Table of ContentsCOVER CREEP7(Title page) Copyright Information The Japan Society of Mechanical Engineering(Information) Preface ORGANIZING COMMITTEE(Information) CREEP7 CONTENTS(Divisional title) CONTENTS CREEP7 Keynote Lectures 1(Divisional title) KL-1-1 Steady-state Creep Reference Rupture Stresses for Internally Pressurised Pipes with Additional End Load(Keynote Lectures 1) KL-1-2 Materials Technology for Advanced Land Based Gas Turbines(Keynote Lectures 1) KL-1-3 Toward Future Advances in High Temperature Design(Keynote Lectures 1) CREEP7 Life Assessment of Thermal Power Plant 1(Divisional title) SA-01-1(008) A Manual For Life Assessment Of Power Boilers In Brazil : Its Development And Application(Life Assessment of Thermal Power Plant 1) SA-01-2(022) Life Prediction of Ligament Cracking in Thermal Fatigue Test Simulating Boiler Header(Life Assessment of Thermal Power Plant 1) SA-01-3(088) Creep-Fatigue Crack Growth Evaluation of Low Alloy Steel under Displacement-Controlled Conditions(Life Assessment of Thermal Power Plant 1) SA-01-4(063) Application of Risk-Based Maintenance on 600MW fossil-fired power plant(Life Assessment of Thermal Power Plant 1) CREEP7 Materials Performance in Nuclear Application 1(Divisional title) SB-01-1(020) Creep Behavior of 8Cr2WVTa Martensitic Steel Designed for Fusion DEMO Reactor : An Assessment on Helium Embrittlement Resistance(Materials Performance in Nuclear Application 1) SB-01-2(065) Thermal fatigue experiment of the CuCrZr divertor mock-ups(Materials Performance in Nuclear Application 1) SB-01-3(098) Study on Creep-Fatigue Life of Irradiated Austenitic Stainless Steel(Materials Performance in Nuclear Application 1) SB-01-4(049) Basic Material Properties of Cr-Mo Steels over 1273K(Materials Performance in Nuclear Application 1) CREEP7 Life Assessment of Thermal Power Plant 2(Divisional title) SA-02-1(086) Creep Life Assessment Method of Weldments of Steam Pipes Based on Hardness Distribution Measurement and Hardness Normalized Creep Rupture Master Curves(Life Assessment of Thermal Power Plant 2) SA-02-2(114) ASSESSMENT OF RESIDUAL CREEP LIFE OF Cr-Mo-V STEEL(Life Assessment of Thermal Power Plant 2) SA-02-3(094) Remaining Life Assessment Methods for Boiler Weldment Parts(Life Assessment of Thermal Power Plant 2) SA-02-4(107) Long term behavior of weldments of modern power plant steels(Life Assessment of Thermal Power Plant 2) CREEP7 Materials Performance in Nuclear Application 2(Divisional title) SB-02-1(064) Development of a filler metal for weldments of a Ni-Cr-W superalloy with high creep strength(Materials Performance in Nuclear Application 2) SB-02-2(075) Multiaxial Creep Behavior of Nickel-Base Heat-Resistant Alloys Hastelloy XR and Ni-Cr-W Superalloy at Elevated Temperatures(Materials Performance in Nuclear Application 2) SB-02-3(046) Creep Failure of Reactor Cooling System Piping of Nuclear Power Plant under Severe Accident Conditions(Materials Performance in Nuclear Application 2) SB-02-4(112) RUPTHER : A PROGRAMME TO UNDERSTAND THE RPV LOWER HEAD BEHAVIOUR UNDER SEVERE ACCIDENT LOADING CONDITIONS(Materials Performance in Nuclear Application 2) CREEP7 Keynote Lectures 2(Divisional title) KL-2-1 The role of defect assessment in elevated temperature component design and remaining life estimation codes(Keynote Lectures 2) KL-2-2 Development of Miniature-Specimen Test Techniques For Measuring Creep-Crack-Growth Behavior(Keynote Lectures 2) KL-2-3 The Present Status of Research and Development on Heat Resistant Alloys in China(Keynote Lectures 2) CREEP7 Life Assessment of Thermal Power Plant 3(Divisional title) SA-03-1(060) Nondestructive Evaluation of Creep Damage using Leaky Surface Acoustic Wave Technique(Life Assessment of Thermal Power Plant 3) SA-03-2(040) Non-destructive creep damage evaluation by carbide structure analysis-1 : Carbide structure change of CrMoV turbine rotor steel(Life Assessment of Thermal Power Plant 3) SA-03-3(089) Non-destructive creep damage evaluation by carbide structure analysis-2 : Creep damage evaluation of serviced turbine rotors by carbide structure analysis(Life Assessment of Thermal Power Plant 3) SA-03-4(023) Development of Creep Damage Diagnosis System and New Creep Damage Assessment Method(Life Assessment of Thermal Power Plant 3) CREEP7 Materials Performance in Nuclear Application 3(Divisional title) SB-03-1(033) Application of K-R Creep Damage Model for Type 316LN and HT-9 Stainless Steels(Materials Performance in Nuclear Application 3) SB-03-2(100) Benchmark Study of Creep-Fatigue life Predicted by Elevated Temperature Design Standards of Every Country(Materials Performance in Nuclear Application 3) SB-03-3(074) Inelastic Constitutive Equation in Alloy800H(Materials Performance in Nuclear Application 3) CREEP7 Life Assessment of Thermal Power Plant 4(Divisional title) SA-04-1(085) In-service Degradation and Life Prediction of Coatings for Advanced Land-base Gas Turbine Buckets(Life Assessment of Thermal Power Plant 4) SA-04-2(091) The influence of oxidation on crack-growth behavior in Ni-based DS alloy(Life Assessment of Thermal Power Plant 4) SA-04-3(090) Effect of Repair Welds on the Performance of Service-Aged 2.25Cr-1Mo Piping(Life Assessment of Thermal Power Plant 4) CREEP7 Intermetallics and Its Composites(Divisional title) SB-04-1(003) Creep Behavior of Orthorhombic Ti_2AlNb Based Intermetallic Alloys(Intermetallics and Its Composites) SB-04-2(102) Oxidation Behavior and Mechanical Properties of Nb_3Si_5Al_2 Matrix Compacts Prepared by Spark Plasma Sintering(Intermetallics and Its Composites) SB-04-3(103) High Temperature Fatigue and Creep Behavior of TiB_2 Particulate Reinforced Titanium Aluminide Intermetallic Matrix Composites(Intermetallics and Its Composites) SB-04-4(016) Microstructures and Creep Properties of Al_3Sc with Ternary transition metal additions(Intermetallics and Its Composites) SB-04-5(104) Mechanical Properties and Creep Behavior of In-situ Single Crystal Oxide Ceramic Eutectic Composites in Simulated Severe Environments(Intermetallics and Its Composites) CREEP7 Waste Incinerator(Divisional title) SA-05-1(039) Durability of New Corrosion-resistant Tube Materials in High-efficiency Waste-to-energy Boiler(Waste Incinerator) SA-05-2(048) Prediction of corrosion rate for superheater tube materials in waste incinerators by a regression analysis of field corrosion test data(Waste Incinerator) SA-05-3(067) CORROSION MONITORING OF ALLOYS IN WASTE INCINERATION ENVIRONMENTS(Waste Incinerator) SA-05-4(055) A NEW AUSTENITIC TUBE ALLOY CONTAINING 9% MOLYBDENUM RESISTANT TO FIRESIDE CORROSION IN WASTE INCINERATORS(Waste Incinerator) SA-05-5(097) The Corrosion and Mechanical Behavior of Ni-Cr-Mo Alloy Applied for Superheater Tube(Waste Incinerator) CREEP7 Ceramic, Polymer and Composites(Divisional title) SB-05-1(059) Mechanical Properties of Eutectic Fe-Cr-C Composite Alloys(Ceramic, Polymer and Composites) SB-05-2(041) Degradation of Tyranno^<TM>ZMI Fiber/Si-Ti-C-O Matrix Composites under Constant Load Conditions at Elevated Temperature(Ceramic, Polymer and Composites) SB-05-3(093) Creep of Fiber Reinforced Composites(Ceramic, Polymer and Composites) SB-05-4(101) Viscoelastic shear lag analysis of a cross-ply laminate with transverse cracking(Ceramic, Polymer and Composites) SB-05-5(123) Temperature-Atmosphere Dependence of Creep Behavior of Advanced SiC-Based Fibers(Ceramic, Polymer and Composites) CREEP7 Flaw Assessment at Elevated Temperature 1(Divisional title) SA-06-1(111) Enhanced Reference Stress Approach for Defect Assessment of Components Operating at High Temperatures(Flaw Assessment at Elevated Temperature 1) SA-06-2(013) Size Distribution of Creep Cracks and Fracture Mechanisms in High-Temperature Materials(Flaw Assessment at Elevated Temperature 1) SA-06-3(007) On Time-dependent Crack Growth Parameters in Plasticity and Creep Fields(Flaw Assessment at Elevated Temperature 1) SA-06-4(029) Modelling of Creep Crack Growth in Waspaloy Using Finite Element Methods(Flaw Assessment at Elevated Temperature 1) SA-06-5(120) CREEP DAMAGE AND CRACK GROWTH IN STEEL WELDS(Flaw Assessment at Elevated Temperature 1) SA-06-6(001) ALTERNATIVE APPROACHES IN THE R5 PROCEDURES FOR PREDICTING INITIATION AND THE EARLY STAGES OF CREEP CRACK GROWTH(Flaw Assessment at Elevated Temperature 1) CREEP7 Changes in Microstructure 1(Divisional title) SB-06-1(012) The Effect of Microstructural Morphology of Steel on Threshold Stress in Creep(Changes in Microstructure 1) SB-06-2(031) High Temperature Low Cycle Fatigue of 21/4Cr1Mo Steels : Role of Microstructure and Effect of Environment(Changes in Microstructure 1) SB-06-3(057) Change in Tensile and Creep Properties of 2.25Cr-1Mo Steel by Prolonged Exposure in Plant(Changes in Microstructure 1) SB-06-4(038) Changes in Precipitates of Modified 9Cr-1Mo Steel During Long-term Creep Deformation at 873K and 923K(Changes in Microstructure 1) SB-06-5(036) Influence of Pre-Aging on Creep Rupture Strength of Tungsten Alloyed 9%Cr Ferritic Steel and Creep Damage Evaluation by Electrochemical Method(Changes in Microstructure 1) CREEP7 Flaw Assessment at Elevated Temperature 2(Divisional title) SA-07-1(050) Influence of Temperature on Crack Growth Behavior in a Titanium Alloy Under Multiaxial Fatigue(Flaw Assessment at Elevated Temperature 2) SA-07-2(099) Loading Frequency Effect on Near-Threshold and Sub-Threshold Fatigue Crack Growth in SUS304 Steel at an Elevated Temperature(Flaw Assessment at Elevated Temperature 2) SA-07-3(082) Assessment of Creep-Fatigue Crack Growth of 21/4Cr1Mo/Inconel 182/Type 316 Dissimilar Metal Weld Feature in Cyclic Pure Bending with Hold-Periods.(Flaw Assessment at Elevated Temperature 2) SA-07-4(027) Simplified Estimation Method of Inelastic J-integral for Creep-Fatigue Crack Propagation Prediction in General Loading Conditions(Flaw Assessment at Elevated Temperature 2) SA-07-5(110) Development of Simplified Evaluation Method for Creep J-integral(Flaw Assessment at Elevated Temperature 2) CREEP7 Changes in Microstructure 2(Divisional title) SB-07-1(056) Creep Behavior of Weld Heat Affected Zone Regions for Modified 9Cr-lMo Steel(Changes in Microstructure 2) SB-07-2(070) Assessment of Material Degradation Based on Microstructural Evolution in Type 304H Stainless Steel During Long-Term Creep(Changes in Microstructure 2) SB-07-3(083) Effect of Microstructural Changes During Creep on The Creep Rate at 823K in Type 304 Heat Resistant Steel(Changes in Microstructure 2) SB-07-4(084) Mechanical Properties and Microstructure of 0.1C-18Cr-9Ni-3Cu-Nb, N Steel Tube after Long Term Exposure in a Power Boiler(Changes in Microstructure 2) SB-07-5(073) Development of 18Cr-9Ni-W-Nb-V-N Austenitic Stainless Steel Tube for Thermal Power Boilers(Changes in Microstructure 2) CREEP7 Flaw Progress & Failure Mechanism 1(Divisional title) SA-08-1(024) Time dependent flow behavior of pure aluminum and aluminum-magnesium alloy under a constant stress condition(Flaw Progress & Failure Mechanism 1) SA-08-2(062) Elevated Temperature Strength Evaluation for 2 1/4Cr-lMo steel Weld Joint(Flaw Progress & Failure Mechanism 1) SA-08-3(069) Failure mechanism in Carbon Manganese steel at 360℃ under multiaxial stress states(Flaw Progress & Failure Mechanism 1) SA-08-4(095) In Situ Observation of Mesoscopic Fatigue Deformation Behavior of a Nodular Cast Iron(Flaw Progress & Failure Mechanism 1) SA-08-5(025) Measurement of Micro-Creep Deformation using Electron Moire Method(Flaw Progress & Failure Mechanism 1) CREEP7 Advanced Heat Resistant Steels(Divisional title) SB-08-1(081) Improvement of Creep Strength of Ferritic Steels for 650℃ USC Boilers(Advanced Heat Resistant Steels) SB-08-2(034) Development of Precipitation Strengthened 15Cr Ferritic Creep Resistant Steel(Advanced Heat Resistant Steels) SB-08-3(037) Effects of W and Co on the Microstructure and Creep Strength of the Precipitation Strengthened 15Cr Ferritic Steels(Advanced Heat Resistant Steels) CREEP7 Flaw Progress & Failure Mechanism 2(Divisional title) SA-09-1(014) Advances in the Use of Stress Relaxation Data for Design and Life Assessment in Combustion Turbines(Flaw Progress & Failure Mechanism 2) SA-09-2(068) Evaluation of creep damage due to void growth under triaxial stress states in the design of steam turbine components(Flaw Progress & Failure Mechanism 2) SA-09-3(043) Growth of Grain Boundary Cavity under Nabarro-Herring Creep(Flaw Progress & Failure Mechanism 2) SA-09-4(054) Effect of Notch Depth on Creep Plastic Zone and Crack Initiation of 304 Stainless Steel Double Edge Notched Specimen(Flaw Progress & Failure Mechanism 2) CREEP7 Advanced Heat Resistant Steels(Divisional title) SB-09-1(051) An Improvement on Creep Characteristics in Carbon Free Martensitic Alloys(Advanced Heat Resistant Steels) SB-09-2(042) Creep-Fatigue Interaction for Advanced Ferritic Heat-Resisting Steels(Advanced Heat Resistant Steels) SB-09-3(045) Long-Term Fatigue Properties at High-Temperatures for Ferritic Heat-Resistant 12Cr-2W Steel(Advanced Heat Resistant Steels) CREEP7 Life Prediction of Solder(Divisional title) SA-10-1(010) Creep and Creep Rupture of Sn-37Pb and Sn-95Pb Solders(Life Prediction of Solder) SA-10-2(096) Sb-Sn and Zn-Sn Lead-Free Solders for CBGA(Life Prediction of Solder) CREEP7 Damage Mechanics(Divisional title) SA-10-3(080) A Coupled Creep and Damage Model Considering Non-Symmetric Strengths in Tension and Compression(Damage Mechanics) SA-10-4(032) Finite Element Creep Continuum Damage Mechanics Analysis of Pressurised Pipe Bends with Ovality(Damage Mechanics) SA-10-5(078) On the improvement of creep-damage analysis of thin-walled structures(Damage Mechanics) SA-10-6(106) The Use of CDM Analysis Techniques in High Temperature Creep Failure of Welded Structures(Damage Mechanics) CREEP7 Creep Deformation and Fracture of Superalloys(Divisional title) SB-10-1(005) Relationship of Long-term Creep Behavior with Microstructural Evolution in a Nickel-Base Superalloy Udimet 500(Creep Deformation and Fracture of Superalloys) SB-10-2(015) CREEP BEHAVIOR OF Ir-Nb AND Ir-Zr REFRACTORY SUPERALLOYS(Creep Deformation and Fracture of Superalloys) SB-10-3(017) Construction of Database on Heat Resistant Alloys and Some Analyses of Creep Properties(Creep Deformation and Fracture of Superalloys) SB-10-4(021) Creep Behavior of Ir-Nb-Ni Two-phase Refractory Superalloy(Creep Deformation and Fracture of Superalloys) SB-10-5(116) Change in Feature of Transient Creep with Decreasing Stress(Creep Deformation and Fracture of Superalloys) CREEP7 Inelastic Modeling & Analysis 1(Divisional title) SA-11-1(076) Unified Inelastic Constitutive Equations for Ni-based Superalloy IN738LC(Inelastic Modeling & Analysis 1) SA-11-2(026) Multiaxial Inelastic Deformation at High Temperature and Constitutive Modeling Based on Viscoplasticity Theory(Inelastic Modeling & Analysis 1) SA-11-3(047) THE DEVELOPMEENT OF MULTI-AXIAL CREEP DAMAGE CONSTITUTIVE EQUATIONS FOR 0.5Cr0.5Mo0.25V FERRETIC STEEL AT 590℃(Inelastic Modeling & Analysis 1) SA-11-4(108) Investigations on the creep ratchetting behavior of 1 Cr and 9 Cr steels(Inelastic Modeling & Analysis 1) CREEP7 Microstructure & Crack Propagation of Superalloys(Divisional title) SB-11-1(115) Stereological Analysis of Rafting in Single Crystal CMSX-4(Microstructure & Crack Propagation of Superalloys) SB-11-2(044) Estimation of Remaining Lifetime of Ni-based Single Crystal Superalloy by the measuring of High Temperature Internal Friction Peak(Microstructure & Crack Propagation of Superalloys) SB-11-4(118) Effects of Loading Frequency and Environment on Creep-Fatigue Small Crack Growth Behavior in CM247 Polycrystalline Ni-Base Superalloy(Microstructure & Crack Propagation of Superalloys) SB-11-5(122) Creep Behavior of a New Ni-base Single-crystal Superalloy, TMS-82+(Microstructure & Crack Propagation of Superalloys) CREEP7 Inelastic Modeling & Analysis 2(Divisional title) SA-12-1(004) Creep Equations for High Temperature Materials(Inelastic Modeling & Analysis 2) SA-12-2(105) Modeling of rate dependence and creep using VBO with a minimum number of constants(Inelastic Modeling & Analysis 2) SA-12-3(006) Strain Concentration Mechanism during Stress Relaxation Process and its Prediction(Inelastic Modeling & Analysis 2) SA-12-4(077) Viscoplasticity Model using Framework of Crystal Plasticity and Its Application of High Temperature Structural Analysis(Inelastic Modeling & Analysis 2) CREEP7 Thermo-Mechanical Fatigue of Superalloys & Coatings(Divisional title) SB-12-1(011) Thermal-mechanical Fatigue Crack Growth Behavior in Ni_3Al Superalloy(Thermo-Mechanical Fatigue of Superalloys & Coatings) SB-12-2(052) Thermal Fatigue in Thermal Barrier Coating(Thermo-Mechanical Fatigue of Superalloys & Coatings) SB-12-3(066) Effects of Strain Holding on Creep-Fatigue Micro Crack Initiation Life in Ni-based Single Crystal Superalloy(Thermo-Mechanical Fatigue of Superalloys & Coatings) SB-12-4(117) The effect of Service Exposure on Mechanical Properties of Gas Turbine Blade Coatings(Thermo-Mechanical Fatigue of Superalloys & Coatings) SB-12-5(119) Collaborative Research on Themo-Mechanical and Isothermal Low-Cycle Fatigue Strength of Ni-Base Superalloys and the Protective Coatings at Elevated Temperatures in Japan.(Thermo-Mechanical Fatigue of Superalloys & Coatings)

Bibliographic Record

You can check the details of this material, its authority (keywords that refer to materials on the same subject, author's name, etc.), etc.

Digital

Material Type
電子書籍・電子雑誌
Publication, Distribution, etc.
Text Language Code
ENG
Persistent ID (NDL)
info:ndljp/pid/10356211
Collection (particular)
国立国会図書館デジタルコレクション > 電子書籍・電子雑誌 > 学術機関 > 学協会
Acquisition Basis
NII-ELS
Available (W3CDTF)
2017-06-22
Date Accepted (W3CDTF)
2017-05-19T11:30:20+09:00
Access Restrictions
インターネット公開