List of volumes and issues
38 Records
Available onlineNational Diet Library
Table of ContentsCOVER MATERIALS SCIENCE RESEARCH INTERNATIONAL EDITORIAL BOARD COLOPHON CONTENTS Notice about photocopying Proposal of the Prediction Method Using a Competing Risk Model on the Bending Strength of 2D-C/C Composites Deterioration of Durability and Fundamental Acceleration Mechanism of Neutralization of Concrete Due to Freezing and Thawing Action Mechanical and Thermal Properties of Biopolyester-Lignophenol Films Plasticization of Lignocellulosics through the Phase-Separation System for the Resources Circulation MATERIALS SCIENCE RESERCH INTERNATIONAL CONTENTS OF VOLUME 1(1995)〜10(2004) BACKCOVER
Available onlineNational Diet Library
Table of ContentsCOVER MATERIALS SCIENCE RESEARCH INTERNATIONAL EDITORIAL BOARD COLOPHON CONTENTS Notice about photocopying Macro-, Meso- and Micro-scopic Metallo-thermo-mechanics : Application to Phase Transformation Incorporating Process Simulation A Homogenization Procedure for the Numerical Simulation of Mechanical Behavior of CFCC by Considering the Overall and Local Anisotropic Damage Residual Stress Determination by the Hole Drilling Method in the Case of Highly Stressed Surface Layers Axial Multiple Crack Propagation and Crack Kinking Criteria in Pressurized Fuselage Strength Dependence of Intergranular Stress Corrosion Cracking Susceptibility on 3.5% NiCrMoV Steel at 403K Tension-Torsion Multiaxial Creep-Fatigue Lifetime for CMSX-2 Nickel Base Single Crystal Superalloy Production of Crystallized Carbon for Electromagnetic Shielding from Lignocresol by Nickel-Catalyzed Carbonization : Influence of Calcium Co-loading (I) Preparation of Mixed Oxide Powders in the Systems ZrO_2-M_xO_y and [20CeO_2-80ZrO_2(mol%)]-M_xO_y from Zirconium Sulfated Slurry for the Purification Catalysts of Automotive Emission New Deterioration Index of Durability and Strength Evaluation of Structural Concrete under Freezing and Thawing Action BACKCOVER
Available onlineNational Diet Library
Table of ContentsCOVER MATERIALS SCIENCE RESEARCH INTERNATIONAL EDITORIAL BOARD INTERNATIONAL ADVISORY EDITORIAL BOARD EDITORIAL DATA 奥付 CONTENTS Notice about photocopying Constitutive Equation for Plastic Behavior of Hydrostatic-Pressure-Dependent Polymers Mechanical Properties of Thermoplastic Rods by Hot Extrusion in Solid State under Constrained Strain Recovery Fracture Behavior of HIP Bonded C1100 Copper and SS400 Mild Steel Fatigue Strength of Ti-6Al-4V Alloys Containing Small Artificial Defects Aperture of Granite Fracture and Effects for Fluid Flow Domain Structures and Rheological Properties of Immiscible Polymer Blends under Shear Flow in Parallel Plates Effect of Texture and Composition of Microorganisms Carrier for Disposal of Wastewater CONTENTS(MATERIALS SCIENCE RESEARCH INTERNATIONAL, VOLUME 9, 2003) BACKCOVER
Available onlineNational Diet Library
Table of ContentsCOVER MATERIALS SCIENCE RESEARCH INTERNATIONAL EDITORIAL BOARD INTERNATIONAL ADVISORY EDITORIAL BOARD EDITORIAL DATA 奥付 CONTENTS Notice about photocopying The High Strain Rate Dynamic Stress-Strain Curve for OFHC Copper Luders Deformation and Strain Aging of [001] Oriented Fe-30%Cr Alloy Single Crystals Deformation Mechanism of [001] Oriented Fe-30%Cr Alloy Single Crystals Fatigue Properties of Pre-strained Eutectoid Steel Effects of Tempering Temperature and Stress Amplitude on Low-cycle Fatigue Behavior of a Cold-Work Tool Steel Effects of Prestraining on High-Cycle Fatigue Strength of High-Strength Low Alloy TRIP-Aided Steels Corrosion Behavior of Epoxy Resin Cured with Different Amount of Hardener in Corrosive Solutions Effect of Air-oxidation on the Thermal Diffusivity of the Nuclear Grade 2-dimensional Carbon Fiber Reinforced Carbon/carbon Composite BACKCOVER
Available onlineNational Diet Library
Table of ContentsCOVER MATERIALS SCIENCE RESEARCH INTERNATIONAL EDITORIAL BOARD INTERNATIONAL ADVISORY EDITORIAL BOARD EDITORIAL DATA 奥付 CONTENTS Notice about photocopying Micro-structure of Bentonite Clay and Diffusion Coefficient Given by Multiscale Homogenization Analysis Residual Thermal Stresses in Multilayered Functionally Graded Material Plates The Effect of Loading Direction and Stacking Sequence on the Strength in Quasi-Isotropic CFRP Laminates Impact Damage Resistance of CFRP Laminate with Epoxy-Resin Surface Layer Effects of Bias Voltage and Discharge Current on Mechanical Properties of TiN Film Deposited by DC Magnetron Sputtering Hydroxyapatite Coatings on Ti Plate via Chemical Bath Deposition Solid State Diffusion Bonding of Superplastic Duplex Stainless Steel with Carbon Steel Assessment of Damage Tolerance and Reliability for Ceramics Effects of Cold Working and Heat Treatment on Transformation Temperature of Ti-41.7Ni-8.5Cu (at%) Shape Memory Alloy and Its Probabilistic Prediction Probabilistic Estimation of the Degradation of Function and Strength of Ti-41.7Ni-8.5Cu (at%) Shape Memory Alloys under Thermo-Mechanical Cyclic Conditions Remaining Life Evaluation of 316LC Steel Based on a New Creep-Fatigue Damage Rule BACKCOVER
Available onlineNational Diet Library
Table of ContentsCOVER MATERIALS SCIENCE RESEARCH INTERNATIONAL EDITORIAL BOARD INTERNATIONAL ADVISORY EDITORIAL BOARD EDITORIAL DATA 奥付 CONTENTS Notice about photocopying Editorial : Special Issue on High Temperature Strength of Materials The Potential for the Improvement of High Performance Thermal Barrier Coatings Inelastic Analysis and Thermal Fatigue Life Prediction of a Perforated Cylinder Based on the Effective Stress Concept Prediction of Mechanical Properties of Lead-free Solders Using Indentation Method Creep Fracture Analysis of W Strengthened High Cr Steel Weldment Compressive Strain Hold Effect on High Temperature Low-Cycle Fatigue Crack Growth in Superalloys Creep-Fatigue Crack Growth Behavior of Low Alloy Steel under Displacement-Controlled Conditions Thermal Aging Embrittlement of Tungsten-Alloyed 9% Cr Ferritic Steels and Electrochemical Evaluation Creep and Fatigue Properties of Newly Developed Ferritic Heat-Resisting Steels for Ultra Super Critical (USC) Power Plants Undesirable Effect of Local Cellular Transformation in Microstructurally-Controlled Ni-base Superalloys Subjected to Previous Damage on High Temperature Fatigue Strength and the Prevention : For Recoating and Refurbishment Technology The Numerical Simulation of the Mechanical Behavior of CFCC with Matrix Anisotropic Damage by Homogenization Method High Temperature Fatigue Deformation Measurement of Ceramics Thermally Sprayed SUS304 Steel Using an ESPI System Estimated and Evaluated Residual Stress by Vickers Indentation in Several Structural Ceramics Neutron Diffraction Study of Thermal Residual Strain in Three Layered Materials Made by Self-propagating High-temperature Synthesis Electrochemical Evaluation of Damage Level to Weight Bearing Surface of Metal Head Joint Prosthesis Mechanism of Corrosion Resistance Degradation of Cr-Plated Parts Due to Heat Treatment and Its Prevention Application of Fractal Analysis to Quantitative Evaluation of Three-dimensional Shape Irregularity of Concrete Aggregates Design and Function of Lignin-Based Recyclable Composites Local Structure Stability of Cu-Al_2O_3 NO_x Removal Catalyst MATERIALS SCIENCE RESEARCH INTERNATIONAL INSTRUCTION FOR CONTRIBUTORS BACKCOVER
Available onlineNational Diet Library
Table of ContentsCOVER MATERIALS SCIENCE RESEARCH INTERNATIONAL EDITORIAL BOARD 奥付 CONTENTS Notice about photocopying Special Issue on Materials Evaluation by X-ray and Neutron Diffractions(<Special Issue>Materials Evaluation by X-ray and Neutron Diffractions) Neutron Diffraction Measurements of Residual Stresses in Engineering Materials and Components(<Special Issue>Materials Evaluation by X-ray and Neutron Diffractions) The Optimization of the X-ray Stress Measurement Condition on Austenitic Stainless Tubes for Electric Power Plants(<Special Issue>Materials Evaluation by X-ray and Neutron Diffractions) Modeling and Simulation of the ψ Assembly X-ray Stress Measurement Using PSD as Detector(<Special Issue>Materials Evaluation by X-ray and Neutron Diffractions) Effect of Plasma Protection Net on Crystal Orientation and Residual Stress in Sputtered Gallium Nitride Films(<Special Issue>Materials Evaluation by X-ray and Neutron Diffractions) Preventive Effect of Shot Peening on Stress Corrosion Cracking(<Special Issue>Materials Evaluation by X-ray and Neutron Diffractions) X-Ray Evaluation of Pulse-Plated Crack-Free Cr Layer(<Special Issue>Materials Evaluation by X-ray and Neutron Diffractions) Mechanism of Magnetic Domain Refinement on Grain-Oriented Silicon Steel by Laser Irradiation(<Special Issue>Materials Evaluation by X-ray and Neutron Diffractions) Effect of Polarization on Deformation and Fracture of Tetragonal PZT(<Special Issue>Materials Evaluation by X-ray and Neutron Diffractions) Regularity of Strain Distribution in Short-Fiber/Whisker Reinforced Composites Estimation of Delayed Failure Life of Alumina Ceramic Components Subjected to Thermal Stress during Practical Service Effect of Al Ion Implantation and Hydrogen Absorption on Shape Memory Properties of Ti-Ni Alloy Changes in the Barrier Properties to Gaseous H_2S Accompanying Elongational and Bending Deformations Imposed on Silicate Deposited Nylon 6 Films Evaluation of Sorption Behavior of Heavy Oil into Exfoliated Graphite by Wicking Test Nickel-Catalyzed Carbonization of Lignocresol to Produce Crystallized Carbon Usable for Electromagnetic Shielding MATERIALS SCIENCE RESEARCH INTERNATIONAL CONTENTS OF VOLUME 8 (2002) MATERIALS SCIENCE RESEARCH INTERNATIONAL INSTRUCTION FOR CONTRIBUTORS BACKCOVER
Available onlineNational Diet Library
Table of ContentsCOVER MATERIALS SCIENCE RESEARCH INTERNATIONAL EDITORIAL BOARD 奥付 CONTENTS Notice about photocopying Markov Process Analysis for the Strength of Ceramic Matrix Composites Reinforced with Continuous Fibers(<Special Issue>Reliability Engineering in Materials and Structures) Tunneling Algorithm Applied to Reliability Analysis of Laminated Composite Plate(<Special Issue>Reliability Engineering in Materials and Structures) Reliability of Strength and Long-Term Life for Ceramics/Metal Jointing Parts under Neutron Irradiation(<Special Issue>Reliability Engineering in Materials and Structures) Probabilistic Strength Estimation for Ceramic-Metal Joints with Various Interlayer Thicknesses(<Special Issue>Reliability Engineering in Materials and Structures) Fatigue Strength and Fracture Mechanisms of Porous Ceramics(<Special Issue>Reliability Engineering in Materials and Structures) Evaluation on Fatigue Characteristics of Thin Plates for Diaphragms(<Special Issue>Reliability Engineering in Materials and Structures) On Reliability Evaluation of a Diaphragm in a Light Touch Switch(<Special Issue>Reliability Engineering in Materials and Structures) Field Damage Data Analysis and Probabilistic Fatigue Life Assessment of Turbine Components(<Special Issue>Reliability Engineering in Materials and Structures) Progress in the Instrumented Charpy Impact Test Comparing Damage in CFRP Laminates due to Soft Body and Hard Body Impacts Evaluation of Tensile Strength and Fatigue Strength of 6061 Aluminum Alloy Friction Welded Joint MATERIALS SCIENCE RESEARCH INTERNATIONAL INSTRUCTION FOR CONTRIBUTORS BACKCOVER
Available onlineNational Diet Library
Table of ContentsCOVER MATERIALS SCIENCE RESEARCH INTERNATIONAL EDITORIAL BOARD 奥付 CONTENTS Notice about photocopying Sensing with Carbon Fibres in Polymer Composites Fatigue Properties of Notched Aluminum Specimens after Hard Rolling Influence of Na_2Si_2O_5 on the Hydration of Tetracalcium Aluminoferrite Influence of Na_2Si_2O_5 on the Hydration of C_4AF with Various Surface Areas Performance of Calcium Silicate Hydrate Briquettes Produced from Fly Ash and Slaked Lime in Disposal of Wastewater Application of X-Ray Stress Measuring Technique to Curved Surfaces : Residual Stress on Spherical Surfaces A Numerical Investigation on Variation of Shape Parameter in Two-Parameter Weibull Distribution Function Fitted to Distribution of Ceramic Strength Second-Harmonic Generation in Thermally/Electrically Poled Transparent BaTiO_3 Thin Films Prepared by Dip-Coating Method MATERIALS SCIENCE RESEARCH INTERNATIONAL INSTRUCTION FOR CONTRIBUTORS BACKCOVER
Available onlineNational Diet Library
Table of ContentsCOVER MATERIALS SCIENCE RESEARCH INTERNATIONAL EDITORIAL BOARD 奥付 CONTENTS Notice about photocopying The Accident at Three Mile Island Rheological Behavior during Phase Separation Induced by UV Curing Effective Young's Modulus of a Composite Including Two Groups of Periodically Arranged Inclusions The Evolution of Shear Deformation Texture and Grain Refinement in Asymmetrically Rolled Aluminum Sheets X-Ray Study on Lattice Strain and Domain Switching Induced in Rhombohedral PZT by Poling and External Loading Stereoscopic Fracture Surface Analysis by SEM Using Advanced Stereo Matching Performance of Carbonized Sugi Wood and Bark for Humidity Control MATERIALS SCIENCE RESEARCH INTERNATIONAL INSTRUCTION FOR CONTRIBUTORS BACKCOVER
Bibliographic Record
You can check the details of this material, its authority (keywords that refer to materials on the same subject, author's name, etc.), etc.
- Material Type
- 電子書籍・電子雑誌
- Publication, Distribution, etc.
- Text Language Code
- ENG
- Persistent ID (NDL)
- info:ndljp/pid/10387616
- Collection (particular)
- 国立国会図書館デジタルコレクション > 電子書籍・電子雑誌 > 学術機関 > 学協会
- Acquisition Basis
- NII-ELS
- Available (W3CDTF)
- 2017-08-30
- Date Accepted (W3CDTF)
- 2017-07-27T09:11:55+09:00
- Access Restrictions
- インターネット公開