List of volumes and issues
14 Records
Available onlineNational Diet Library
Table of ContentsCover [OTHERS] Acknowledgement PREFACE Contents 1. First Order Approximation to Three-Dimensional Turbulent Boundary Layer and Its Application to Model-Ship Correlation 2. On the Principal Particulars of Ship Hull Form and Wave Resistance 3. On the Turning of Tug-Towed Ships Systems 4. Periodic Response Analysis of Floating Framed Structures (continued) 5. Initial Stress Distribution of Ore in Cargo Holds 6. Fundamental Study of Wave Impact Loads on Ship Bow 7. A Preliminary Study on Surface Crack Growth in a Combined Tensile and Bending Fatigue Process 8. Studies on Deformation and Cracking in One Sided Welding 9. On the Strength of Structures with Imperfections 10. HICAS: Complete Shipbuilding Information Processing System Based on a Veritable Data Base
Available onlineNational Diet Library
Table of ContentsCover [OTHERS] Acknowledgement PREFACE Contents 1. On the Interference between Bow-generated Waves and Long Slender-ship at Low Froude-number 2. A Study on Resistance of Shallow-Running Flat Submerged Bodies 3. On the Wave Pressure Acting on the Surface of an Elongated Body Fixed in Head Seas 4. Model Tests on Impulsive Water Pressures Acting on the Hull Surface of an Ore-carrier in Two-Directional Waves 5. On the Characteristics of Water Impact Pressures Acting on a Hull Surface Among Waves 6. Total System of Analysis on the Longitudinal Strength of Ships : on the Longitudinal Strength of Oil Tankers 7. An Ultimate Transverse Strength Analysis of Ship Structures 8. Periodic Response Analysis of Floating Framed Structures 9. Prevention of End Cracking in One-Side Automatic Welding : Numerical Analysis of Transient Phenomena in Welding 10. COD and Stretched Zone as the Criterion for Fracture Initiation from a Precrack at Various Temperatures 11. Fatigue Crack Propagation under Controlled Stress Intensity Factor
Available onlineNational Diet Library
Table of ContentsCOVER [OTHERS] CONTENTS 1. The Added Resistance of Ships in Regular Oblique Waves 2. Study on Cavitation Erosion 3. Calculations on the Steered Motion of a Ship under the Action of External Forces : (Part II) Analysis of Motion Derivatives by a New Mathematical Model 4. An Investigation into the Propulsive Performance of a High Speed Container Ship with Triple Screws 5. Some Concept f or ULCC with Small L/B Ratio 6. Studies on Optimization of Ship Structures (2nd Report) : Optimum design of framed structures and longitudinal members of tanker 7. Effect of Line-Heating on Notch Toughness of 50 kg/mm^2-Class High-Tensile Steel Plates 8. A Study on Pre-Erection System in Hull Construction 9. Elasto-Plastic Analysis of the Distribution of Ore Pressure on Longitudinal Bulkheads in an Ore Carrier 10. The Statistics of Failure and Evaluation of Reliability on the Marine Diesel Engine
Available onlineNational Diet Library
Table of ContentsCOVER [OTHERS] CONTENTS Wave Making Resistance in Viscous Fluid Calculation of Ship Frictional Boundary Resistance by Three-dimensional Boundary Layer Theory Comparison of Wake Distributions between Ship and Model Wave Action on Groups of Vertical Circular Cylinders An Analyzing Method of Manoeuvrability with the Phase Plane Ice Accumulation on Ships On Long-Term Distribution of Wave-Induced Response Variables of Ships Notch Effects in Low Cycle Fatigue of Steels Study on Brittle Crack Arrester : Considerations on the Arrest of a Very Long Crack Effects of Stress-Relieving Heat Treatment on the Brittle Fracture Initiation in Welded Structures Operation of Large Fully Loaded Industrial Carriers
Available onlineNational Diet Library
Table of ContentsCOVER [OTHERS] CONTENTS 1. On the Viscous Flow past Blunt Bodies 2. On Viscous Flow about Bluff Body at High Reynolds Number 3. Calculation of Non-lifting Potential Flow about Ship Hulls 4. Wave Analysis of Simple Hull Forms : Effect of Frameline Forms 5. Study on Wave Analysis by Use of INUID Geosims 6. Comparison of Velocity Distribution in the Boundary Layer between Ship and Model 7. A Method for Calculating the Hydrodynamic Characteristics of Marine Propellers 8. A Practical Method for Testing Ship Models in Transient Water Waves 9. On the Modified Zigzag Maneuver and its Application 10. Full-scale Measurement of Frequency Response Characteristics of Ships in Steering : -Parallel Shift Maneuver Test as Applied to Actual Ships 11. An Analysis of the Manoeuvrability of a Ship Associated with Unusual Characteristics Under Steerage
Available onlineNational Diet Library
Table of ContentsCOVER [OTHERS] CONTENTS 1. On the Analysis of Local Strength of the Ship Using the "Standard Unit Method" 2. A Torsional Strength Analysis on the Container Ship by Means of the Finite Element Procedure and Full-Scale Testing 3. Three Dimensional Strength Analysis of All Over the Length of a Tanker 4. Analysis of Elastic-Plastic Buckling of Plates with Stiffeners by Finite Element Method 5. Ultimate Strength of Girder Structures (3rd Report) : On the Lateral Instability of Deep Girders 6. On the Minimum Weight of Orthogonally Stiffened Plates Under Lateral Pressure 7. Studies on Optimization of Ship Structures (1st Report) : Nonlinear Programming and Optimum Design of Box and I Section Girders 8. Higher Mode Vertical Vibration of Giant Tanker 9. Experimental Studies on Heat Transfer Coefficients and Effective Length of Tank Heating Coils in Vessels
Available onlineNational Diet Library
Table of ContentsCOVER [OTHERS] CONTENTS 1. On the Impact Strength of Ships Due to Shipping Green Seas : Towing Experiments of a Ship Model in Regular Waves 2. Transverse Wave Loads on a Ship in Waves (Part I, Part II, and Part III) 3. Design Study on the Torsional Strength of Container Ships 4. On the Local Buckling Strength of a Super Tanker : Buckling Strength of Web Plates with Cut-outs for Longitudinals 5. On the Effectiveness of Face Plate and Skin Plate at Bilge Part of Tankers (1st and 2nd Report) 6. Reliability of Single-and Multi-member Structure Subjected to Fluctuating Load 7. On the Design of Fiberglass Reinforced Plastic Ship Hull Structures 8. Computer System in a Shipyard Production Management
Available onlineNational Diet Library
Table of ContentsCOVER [OTHERS] CONTENTS 1. On the Method for Calculating the Approximate Solution of Source Distribution Over the Hull Surface 2. Study on Separation of Ship Resistance Components 3. A New Component of Viscous Resistance of Ships 4. Some Application of the Wave Analysis on the Geosim-models and Their Actual Ship 5. Measurements of Boundary Layers of Ships (I) 6. Wave Excitation Forces on Two Dimensional Ship of Arbitrary Sections 7. On the Study Application of the Multiple Input Analysis to the of Ship's Behaviour and an Approach to the Non-linearity of Responses 8. A New Procedure of Maneuvering Model Experiment 9. Calculations on the Steered Motion of a Ship under the Action of External Forces : (Part I) Course keeping and Turning of a Ship in Uniform Wind and Flow 10. Equivalent Added Mass of Ships in Collisions
Available onlineNational Diet Library
Table of ContentsCOVER [OTHERS] CONTENTS 1. Kinetic Behavior of a Marine Steam Plant 2. Thermal Problems in Quick Start and Rapid Load Increase of Marine steal Turbines steal Turbines 3. Consideration and Experimental Studies on Supercharged Once-through Boilers 4. Study Boiler Efficiency Control 5. On Vibration of Boiler Generating Tubes 6. Characteristics of irregular Injection in Diesel Engine Fuel Systems at Low Speed 7. Analytical Methods for Thermal Load of Piston Crown 8. Study on the Availability of Crude Oil in Diesel Engine : Part 1. On the Engine Performance of Crude Oil 9. Effects of Ultrasonic-Treatment on Marine Diesel Fuel Oil 10. A Theoretical Consideration on the Axial Vibrations of Crankshaft 11. The Fatigue Strength of Large Cast Steel Crank Throws for Marine Diesel Engines 12. On Crankshaft Fillet Stresses of Marine Diesel Engine 13. Improvement on the Forging Method of Semi-Built-Up Crankshaft 14. Fatigue Strength of Very Large Cast Steel Crankshaft with Surface Cold Rolling of Their Fillet 15. Approximate Theoretical Analysis of the Cycle for Pulse-Type Turbo Charged Two-Cycle Diesel Engine 16. Development of New High Strength Special Steel Propeller for Big Ships 17. Consideration on Propeller Damping in Torsional Vibration of Recent Propulsion System 18. An Investigation on the Process of Bending Fatigue Failure of Propeller Shaft 19. Theoretical Approach of Load-distribution in Stern Tube Bearing
Available onlineNational Diet Library
Table of ContentsCOVER [OTHERS] CONTENTS 1. Investigation on "Standard for Cutout in Web of Girder, etc." : Cutout Sub-committee in Kanto District Section of Ship Structure Committee 2. Long-Term Predictions of Wave Bending Moment (Part I and Part II) 3. On the Transverse Strength of Oil Tankers 4. On the Horizontal and Torsional Vibration of Ships 5. One side Automatic Welding Applied in Japanese Shipyards 6. The Use of the Numerical Control Systemic the Hull Design and Production 7. On the Flow Line of Assembly Blocks 8. The Continuous Flow Production System which has Applied to Hull Works in Shipbuilding Industry
Bibliographic Record
You can check the details of this material, its authority (keywords that refer to materials on the same subject, author's name, etc.), etc.
- Material Type
- 電子書籍・電子雑誌
- Publication, Distribution, etc.
- Text Language Code
- ENG
- Persistent ID (NDL)
- info:ndljp/pid/10387649
- Collection (particular)
- 国立国会図書館デジタルコレクション > 電子書籍・電子雑誌 > 学術機関 > 学協会
- Acquisition Basis
- NII-ELS
- Available (W3CDTF)
- 2017-08-30
- Date Accepted (W3CDTF)
- 2017-07-27T09:11:55+09:00
- Access Restrictions
- インターネット公開