Search by Bookstore
Table of Contents
Holdings of Libraries in Japan
This page shows libraries in Japan other than the National Diet Library that hold the material.
Please contact your local library for information on how to use materials or whether it is possible to request materials from the holding libraries.
other
CiNii Research
Search ServicePaperYou can check the holdings of institutions and databases with which CiNii Research is linked at the site of CiNii Research.
Search by Bookstore
Bibliographic Record
You can check the details of this material, its authority (keywords that refer to materials on the same subject, author's name, etc.), etc.
- Material Type
- 図書
- Title
- Publication, Distribution, etc.
- Alternative Title
- IMechE seminarIMechE seminar publication
- Place of Publication (Country Code)
- uk
- Target Audience
- 一般
- Related Material
- Fluid mechanics and dynamics of multi-valve enginesAutomotive systems, sensors, and signallingRenewable energy storage : its role in renewables and future electricity marketsThe inspection and structural validation of nuclear power generation plant : papers presented at a seminar organized by the Nuclear Energy Committee of the Institution of Mechanical Engineers and held at the Institution of Mechanical Engineers on 25 November 1993Successful management for safety : papers presented at a meeting organized by the Engineering Manufacturing Industries Division of the Institution of Mechanical Engineers in association with the Hazards Forum, and held at the Institution of Mechanical Engineers on 12-13 October 1993Noise control and measurement techniques for fluid machinery : papers presented at a Seminar organized by the Fluid Machnery Committee of the Institution of Mechanical Engineers, and held at the Institution of Mechanical Engineers on 18 May 1995Design, reliability, and maintenance for railways, selected papers from Railtech 96Fuel injection systems : 1-2 December 1999, The Institution of Mechanical Engineers, London, UKAutomotive modelling and NVH : techniques and solutionsAutomotive powertrains : selected papers from Autotech 95, 7-9 November, 1995Shaft sealing in centrifugal pumps : papers presented at a seminarEngine transient performance : papers presented at a seminar organized by the Combustion Engines Group of the Institution of Mechanical Engineers, and held at the Institution of Mechanical Engineers on 7 November 1990Aerospace transmission technologyCCGT plant components : development and reliabilityElectronic braking systems, 17 September 1996Cost-effective titanium component technology for leading-edge performanceComposites for the offshore oil and gas industry : design and applicationLean burn combustion engines, 3-4 December 1996Railway rolling stock, selected papers from Railtech 96Recent developments in refrigeration and heat pump technologiesAeroengines and propulsion : selected papers from Aerotech 95Improving vehicle workshop efficiency : incorporating automatic identification technologyDevelopments in plain bearings for the '90s : papers presented at a Seminar organized by the Tribology Group of the Institution of Mechanical Engineers and held at the Institution of Mechanical Engineers on 17 May 1990Noise control in the process industries : papers presented at a seminar organized by the Design and Equipment Committee of the Institution of Mechanical Engineers and held at the Institution of Mechanical Engineers on 11 November 1993Wave energy : papers presented at a seminarGetting trains into service : International Railtech Congress '98, 24-26 November, 1998, National Exhibition Centre, Birmingham, UKInvestment in renewable energyGas engines for co-generation : papers presented at a seminar organized by the Combustion Engines Group of the Institution of Mechanical Engineers, and held at the Institution of Mechanical Engineers on 17 June 1993Foreign object impact and energy absorbing structureRolling element bearings - towards the 21st centuryRail traction and braking, selected papers from Railtech 96Making best use of steam, held at the Institution of Mechanical Engineers on 30 April 1992Boiler shell weld repair : Sizewell 'A' nuclear power station, 25 October, 1999, IMechE HQ, London, UKAutomotive manufacturing : selected papers from autotech 95, 7-9 November 1995Gas turbine pollutant emissionsAdapting to a changing railway : young members' seminarEnergy for the 21st century : 2-3 July 1996Industrial fans, aerodynamic design : papers presented at a seminar organized by the Fluid Machinery Committee of the Power Industries Division of the Institution of Mechanical Engineers and held at the Institution of Mechanical Engineers on 9 April 198Medical applications for shape-memory alloys (SMA) : organized by Medical Engineering Division of the Institution of Mechanical Engineers (IMechE)Latest advances in the aerodynamics of turbomachinery with special emphasis upon unsteady flows, 9-10 December 1996Rotating equipment for the water and sewage industries, held at the Institution of Mechanical Engineers on 25 March 1992Aerospace application of computational methods versus testingEurofighter 2000 : technology for the 21st century, 6 September 1996Bulk materials handling: real-time analysis : based on the papers presented at a Seminar held on 29 April 1997Worldwide engine emission standards and how to meet them : papers presented at the second such seminar organized by the Automobile Division of the Institution of Mechanical Engineers and supported by the Commercial Engines Group, and held at the Institution of Mechanical Engineers on 25-26 May 1993Aviation ground support equipment : meeting the needs of the futureLow-energy cooling technologies for buildings : challenges and opportunities for the environmental control of buildingsFault-free trains - a reality?Fuels for automotive and industrial diesel engines : papers presented at a seminar organized by the Combustion Engines Group of the Institution of Mechanical Engineers, and held at the Institution of Mechanical Engineers on 19 and 20 November 1990Future engine and system technologies : the Euro IV challengeRecent advances in welding simulationPlant monitoring and maintenance routinesWheels and axles : cost-effective engineeringAircraft structures and materials : selected papers from Aerotech 95Cost effective steam and power generation by the combustion of waste : papers presented at a seminar organized by the Steam Plant Committee of the Institution of Mechanical Engineers, and held at the Institution of Mechanical Engineers on 23 September 1993Automotive vehicle technologies : Autotech '97 : Autotech Congress, 4-6 November 1997, National Exhibition Centre, Birmingham, UKAircraft health and usage monitoring systems : selected papers from Aerotech 95Gas explosions in CCGT and steam plants : prevention and controlEnergy saving in the design and operation of compressors, 11 September 1996Safety and the automobile : selected Papers from AUTOTECH '93 which took place at the National Exhibition Centre, Birmingham, UK, on 16-19 November 1993Automobile Transmissions : selected Papers from AUTOTECH '93 which took place at the National Exhibition Centre, Birmingham, UK, on 16-19 November 1993Bus and truck : Autotech '97 : Autotech Congress, 4-6 November 1997, National Exhibition Centre, Birmingham, UKWheels and axlesEnivironmental aspects of nuclear powerHydro power developments : current projects, rehabilitation, and power recovery , 30 October 1997Remanent life predictionAutomotive engines and powertrains : Autotech '97 : Autotech Congress, 4-6 November 1997, National Exhibition Centre, Birmingham, UKEffective resource management in industry : papers presented at a seminar organized by the Environmental Engineering Group of the Institution of Mechanical Engineers, and held at the Institution of Mechanical Engineers on 20 January 1993Advanced driver assistance systems (ADAS) : vehicle control for the futureAutomotive manufacturing : Autotech '97 : Autotech Congress 4-6 November 1997, National Exhibition Centre, Birmingham, UKUsing natural gas in engines : 28 March 1996Installation effects in fan systems : 27 November 1997CFD in fluid machinery design , 15 October 1998Automotive materials technology : Autotech '97 : Autotech Congress, 4-6 November 1997, National Exhibition Centre, Birmingham, UKThe benefits of electronic control systems for internal combustion engines : papers presented at a Seminar organized by the Combustion Engines Group of the Institution of Mechanical Engineers and held at the Institution of Mechanical Engineers on 19 January 1989Fans for hazardous applications : papers presented at a Seminar organized by the Fluid Machinery Committee of the Institution of Mechanical Engineers, and held at the Institution of Mechanical Engineers on 4 October 1994Installation effects in fan systems : papers presented at a seminar organized by the Fluid Machinery Committee of the Institution of Mechanical Engineers, and held at the Institution of Mechanical Engineers on 28 September 1993Condition monitoring of building services systems, held at the Institution of Mechanical Engineers on 28 April 1992Materials and structures for energy adsorptionThe manufacturing challenge in aerospace, 1 July 1997Virtual design and manufactureDesigning high-performance stiffened structuresDesign, selection, and operation of refrigerator and heat pump compressors : achieving economic cost and energy efficiency, 26 November, 1998, IMechE Headquarters, London, UKWave power : moving towards commercial viabilityBoilers in EuropeAlternatively fuelled vehiclesSolids pumping : papers presented at a seminarMaterials and design against fireAutomotive passenger safetyNoise in fluid machinerySuccessful pneumatic conveyingPumping sludge and slurry : 3 March 1998, IMechE Headquarters, London, UKVibrations in centrifugal pumps : papers presented at a seminar organised by the Fluid Machinery Committee of the Power Industries Division of the Institution of Mechanical Engineers, and held at the Institution of Mechanical Engineers on 11 December 1990Machine condition monitoring : papers presented at a seminar organized by the Solid Mechanica and Machine Systems Group of the Institution of Mechanical Engineers, and held at the Institution of Mechanical Engineers on 9 January 1990Automotive refinement : selected papers from Autotech 95, 7-9 November, 1995Opportunities for consumer waste recycling : papers presented at a seminarDiesel fuel injection systems : papers presented at a seminar organized by the Combustion Engines Group of the Institution of Mechanical Engineers, and held at the National Motorcycle Museum, Solihull, UK on 14 and 15 April 1992European engineering research and technology transfer congress : papers presented at a series of Seminars organized by the Institution of Mechanical Engineers in collaboration with other leading Professional Societies worldwide, and held at the International Conference Centre, Birmingham, UK, on 2-4 July 1991Diesel fuel injection systems : papers presented at a seminar organized by the Combustion Engines Group of the Institution of Mechanical Engineers and held at the Institution of Mechanical Engineers on 28-29 September 1995Technology for business needs : International Railtech Congress '98, 24-26 November, 1998, National Exhibition Centre, Birmingham, UKAutomotive electronics : Autotech 97 : Autotech Congress, 4-6 November, 1997, National Exhibition Centre, Birmingham, UKGear technology - gaining a competitive edgeProcess pumps - the state of the art : papers presented at a seminarNoise and vibration : advances in research and developmentLife cycle costsDesign and operation of engines in hazardous atmospheresHydropower developments - new projects and rehabilitation, held on 30 November, 2000, at IMechE Headquarters, London, UKPower generation by renewablesReliability of sealing systems for rotating machineryGround support equipment in the 21st centurySteam turbine governing and overspeed protectionAchieving efficiency through training - the nuclear and safety-regulated industries : papers presented at a seminar organized by the Nuclear Energy Committee of the Mechanical Engineers, and held at the Institution of Mechanical Engineers on 18 October 1994Using computers in the design and selection of fluid machinery : papers presented at a seminar organized by the Fluid Machinery Committee of the Institution of Mechanical Engineers and held at the Institution of Mechanical Engineers on 2 December 1993Bearings for pumps, fans, and compressors : papers presented at a seminar organized by the Fluid Machinery Committee of the Institution of Mechanical Engineers and held at the Institution of Mechanical Engineers on 14 October 1993Centrifugal pumps : the state of the art and new opportunitiesInfrastructure issues : International Railtech Congress '98, 24-26 November, 1998, National Exhibition Centre, Birmingham, UKTomorrow's world : International Railtech Congress '98, 24-26 November, 1998, National Exhibition Centre, Birmingham, UKDeveloping and growing the business - freight : International Railtech Congress '98, 24-26 November, 1998, National Exhibition Centre, Birmingham, UKGas turines : reducing time and cost from concept to product : 13 November 1997Avionic systems, design, and software : selected papers from Aerotech 95Developing and growing the business - passenger : International Railtech Congress '98, 24-26 November, 1998, National Exhibition Centre, Birmingham, UKMultimedia networks for automotive applicationsVibration in fluid machinery : papers presented at a seminar organized by the Fluid Machinery Committee of the Mechanical Engineers, and held at the Institution of Mechanical Engineers on 15 November 1994Fire and explosions : recent advances in modelling and analysisEnergy saving in the design and operation of fansHopper and silo discharge : successful solutionsNoise and the automobile : selected Papers from AUTOTECH '93 which took place at the National Exhibition Centre, Birmingham, UK, on 16-19 November 1993Automotive environmental impact and safety : Autotech '97 : Autotech Congress, 4-6 November 1997, National Exhibition Centre, Birmingham, UKAerospace transmission systems : concurrent design and manufacture, 20 May, 1998, Rolls-Royce, Derby, UKFlaw assessment in pressure equipment and welded structures- PD 6493 to BS 7910Railway engineering, systems, and safety, selected papers from Railtech 96Diesel engines - particulate control : 23 November 1998, IMechE Headquarters, London, UKThe application of expert systems in the power generation industry : papers presented at a seminar organized by the Steam Plant Committee of the Institution of Mechanical Engineers and held at the Institution of Mechanical Engineers on 17 November 1993Automotive fuels for the 21st century, 21 January 1997Train maintenance : International Railtech Congress '98, 24-26 November 1998, National Exhibition Centre, Birmingham, UKFluid machinery ownership costs : papers presented at a seminarNew standards for fans, 3 October, 2000, IMechE Headquarters, London, UKSteam plant : optimization and development by modellingLegislation for noise and vibrationFluid film bearings : recent advances in design and performanceEnergy saving in the design and operation of pumps, 7 March 1996Using powder metallurgy in design : wear, corrosion, and fatigue resistance
- Related Material (URI)
- Data Provider (Database)
- 国立情報学研究所 : CiNii Research
- Original Data Provider (Database)
- CiNii Books