回転水中紡糸法で製造された金属細線の形態に及ぼす製線条件の影響
Digital data available（九州大学学術情報リポジトリ(QIR)）
Begin reading now
学術機関リポジトリデータベース（IRDB）（機関リポジトリ）
Holdings of Libraries in Japan
This page shows libraries in Japan other than the National Diet Library that hold the material.
Please contact your local library for information on how to use materials or whether it is possible to request materials from the holding libraries.
other
Kyushu University Institutional Repository (QIR)
DigitalYou can check the holdings of institutions and databases with which Institutional Repositories DataBase(IRDB)(Institutional Repository) is linked at the site of Institutional Repositories DataBase(IRDB)(Institutional Repository).CiNii Research
Search ServiceDigitalYou can check the holdings of institutions and databases with which CiNii Research is linked at the site of CiNii Research.
Bibliographic Record
You can check the details of this material, its authority (keywords that refer to materials on the same subject, author's name, etc.), etc.
- Material Type
- 記事
- Author/Editor
- 高松 洋曹曹 奎常山城 光 他
- Periodical title
- 九州大学機能物質科学研究所報告 / 九州大学機能物質科学研究所 編
- No. or year of volume/issue
- 9(1) 1995
- Volume
- 9
- Issue
- 1
- Pages
- 13～20
- Publication date of volume/issue (W3CDTF)
- 1995
- ISSN (Periodical Title)
- 0914-3793
- ISSN-L (Periodical Title)
- 0914-3793
- Publication (Periodical Title)
- 春日 : 九州大学機能物質科学研究所
- Place of Publication (Country Code)
- JP
- Text Language Code
- jpn
- NDLC
- Target Audience
- 一般
- Holding library
- 国立国会図書館
- Call No.
- Z14-1380
- Data Provider (Database)
- 国立国会図書館 : 国立国会図書館雑誌記事索引
- Bibliographic ID (NDL)
- 3915744
- Bibliographic Record Category (NDL)
- 632
- Summary, etc.
- Metal wires of Pb, Zn and Fe_<77.5>Si_<7.5>B_<15> were produced by the In-Rotating-Water Spinning Method. The effects on the shape of wire of drum velocity (5.2-8.5m/s), jet ejection velocity (3.5-10.0m/s), incidence angle (30, 45, 60 deg) and nozzle diameter (0.1 and 0.2mm) as well as the kind of metals were examined. Pb showed the best spinnability among the tested metals, although the cross section was relatively flat and marked ripples were formed on the wire surface when the incidence angle and jet velocity were relatively large. A long, straight Fe_<77.5>Si_<7.5>B_<15> wire that had smooth surface and round cross-section was obtained with a 0.2-mm-dia. nozzle when the jet velocity and the drum velocity were almost the same. The Fe_<77.5>Si_<7.5>B_<15> wire produced with a 0.1-mm-dia. nozzle however showed the shape like a string of beads.
- DOI
- 10.15017/6667
- Access Restrictions
- インターネット公開
- Related Material
- 九州大学機能物質科学研究所報告 || 9(1) || p13-20The reports of Institute of Advanced Material Study Kyushu University || 9(1) || p13-20http://www.cm.kyushu-u.ac.jp/
- Data Provider (Database)
- 国立情報学研究所 : 学術機関リポジトリデータベース（IRDB）（機関リポジトリ）
- Original Data Provider (Database)
- 九州大学学術情報リポジトリ(QIR)
- Summary, etc.
- Metal wires of Pb, Zn and Fe_<77.5>Si_<7.5>B_<15> were produced by the In-Rotating-Water Spinning Method. The effects on the shape of wire of drum velocity (5.2-8.5m/s), jet ejection velocity (3.5-10.0m/s), incidence angle (30, 45, 60 deg) and nozzle diameter (0.1 and 0.2mm) as well as the kind of metals were examined. Pb showed the best spinnability among the tested metals, although the cross section was relatively flat and marked ripples were formed on the wire surface when the incidence angle and jet velocity were relatively large. A long, straight Fe_<77.5>Si_<7.5>B_<15> wire that had smooth surface and round cross-section was obtained with a 0.2-mm-dia. nozzle when the jet velocity and the drum velocity were almost the same. The Fe_<77.5>Si_<7.5>B_<15> wire produced with a 0.1-mm-dia. nozzle however showed the shape like a string of beads.
- DOI
- 10.15017/6667
- Access Restrictions
- インターネット公開
- Related Material (URI)
- Data Provider (Database)
- 国立情報学研究所 : CiNii Research
- Original Data Provider (Database)
- Japan Link Center学術機関リポジトリデータベース雑誌記事索引データベースCiNii Articles
- Bibliographic ID (NDL)
- 3915744
- NAID
- 110006177459