Search by Bookstore
Holdings of Libraries in Japan
This page shows libraries in Japan other than the National Diet Library that hold the material.
Please contact your local library for information on how to use materials or whether it is possible to request materials from the holding libraries.
Search by Bookstore
Bibliographic Record
You can check the details of this material, its authority (keywords that refer to materials on the same subject, author's name, etc.), etc.
- Material Type
- 文書・図像類
- Author/Editor
- 河野, 博史
- Author Heading
- Publication, Distribution, etc.
- Alternative Title
- Development of zirconia complex for metal free restoration
- Text Language Code
- jpn
- Subject Heading
- Target Audience
- 一般
- Note (General)
- 2009-2010年度科学研究費補助金(若手研究(B))研究成果報告書 課題番号:21791911 研究代表者:河野博史 (鹿児島大学医学部・歯学部附属病院助教)ジルコニア(Y-TZP)においては、焼成温度が1350°Cではオートクレーブ処理の時間が増加しても単斜晶への変態は認められなかった。1450°C以上では処理時間の増加に伴い単斜晶含有量の増加が認められた。また、1450°C以上で焼成したY-TZPはオートクレーブ処理後のビッカース硬さが低下する傾向が認められた。本研究の結果よりY-TZPでは焼成温度の影響は極めて大きく、焼成温度が高くなるとオートクレーブ処理による低温劣化が生じやすくなることが判明した。For zirconia (Y-TZP), even if the time of autoclave processing of sintering temperature at 1350°C increased, the transformation to monoclinic was not observed. Above 1450°C, the increase in monoclinic content was observed with the increase in processing time. Moreover, as for Y-TZP sintered above 1450°C, the tendency for the Vickers hardness after autoclaving to decrease was observed. The influence of sintering temperature was very greater in Y-TZP than in the result of this research, and when sintering temperature became high, it became clear that it became easy to produce low-temperature degradation by autoclaving.